Am Fri, Nov 18, 2022 at 12:53:44PM +0000 schrieb Klemens Nanni: > On Mon, Nov 14, 2022 at 11:37:05PM +0100, Patrick Wildt wrote: > > Hi, > > > > the u-boot and dtb ports haven't been updated in a while, mostly because > > updating those regularly breaks working machines. I think it's time for > > another update, so here's a diff for both. > > > > Before this heads into the tree it would be nice to get some testing > > from people with Pinebook Pro, RockPro64, and/or especially a BeagleBone > > Black. > > > > I reverted the change that switches from the 'old' cpsw switch driver > > model to the 'new' one. This should allow is to update the dtbs. > > > > I've personally verified that U-Boot+DTB boot fine on NanoPi R2s, but > > we have many more combinations. > > > > I can provide pre-built unsigned packages upon request. > > I installed u-boot-aarch64-2022.10.tgz built with dtb-6.0.8.tgz and > followed INSTALL.arm64 to flash the new files onto my Pinebook Pro's > eMMC. > > There's a u-boot logo visible in the upper right corner and OpenBSD > still boots, but the screen remains black now. > > Previously, I'd see X when xenodm started, now I don't see anything. > No warnings or errors on serial console. > > I also can't switch to another TTY to get a shell. > > Reflashing u-boot from ports makes X work again, no OS changes needed. > > I had the same issue on the same device when trying u-boot 2022.07 some > months ago.
Are you seeing OpenBSD boot on the display? Or do you *only* see a U-Boot logo and nothing else?