Using both 7.3/arm64/miniroot73.img and the 21-Apr-2023 snapshot, I don't have rkpcie0 at mainbus0 showing at boot; hence I can't use any attached PCIe cards. Ultimately, I want to add a PCIe NIC.
If I follow steps at https://github.com/jasperla/openbsd-rockpro64, I was at least able to see this: rkpcie0 at mainbus0 rkpcie0: link training timeout Unfortunately, still no PCIe bus and no attached PCIe NIC showing. I'm I missing a step? Do I need to build the latest u-boot-aarch64 package? My dmesg: OpenBSD 7.3-current (GENERIC.MP) #2101: Fri Apr 21 13:05:51 MDT 2023 dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/GENERIC.MP real mem = 4105936896 (3915MB) avail mem = 3899875328 (3719MB) random: good seed from bootblocks mainbus0 at root: Pine64 RockPro64 psci0 at mainbus0: PSCI 1.0, SYSTEM_SUSPEND cpu0 at mainbus0 mpidr 0: ARM Cortex-A53 r0p4 cpu0: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache cpu0: 512KB 64b/line 16-way L2 cache cpu0: CRC32,SHA2,SHA1,AES+PMULL,ASID16 cpu1 at mainbus0 mpidr 1: ARM Cortex-A53 r0p4 cpu1: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache cpu1: 512KB 64b/line 16-way L2 cache cpu1: CRC32,SHA2,SHA1,AES+PMULL,ASID16 cpu2 at mainbus0 mpidr 2: ARM Cortex-A53 r0p4 cpu2: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache cpu2: 512KB 64b/line 16-way L2 cache cpu2: CRC32,SHA2,SHA1,AES+PMULL,ASID16 cpu3 at mainbus0 mpidr 3: ARM Cortex-A53 r0p4 cpu3: 32KB 64b/line 2-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache cpu3: 512KB 64b/line 16-way L2 cache cpu3: CRC32,SHA2,SHA1,AES+PMULL,ASID16 cpu4 at mainbus0 mpidr 100: ARM Cortex-A72 r0p2 cpu4: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu4: 1024KB 64b/line 16-way L2 cache cpu4: CRC32,SHA2,SHA1,AES+PMULL,ASID16 cpu5 at mainbus0 mpidr 101: ARM Cortex-A72 r0p2 cpu5: 48KB 64b/line 3-way L1 PIPT I-cache, 32KB 64b/line 2-way L1 D-cache cpu5: 1024KB 64b/line 16-way L2 cache cpu5: CRC32,SHA2,SHA1,AES+PMULL,ASID16 efi0 at mainbus0: UEFI 2.0.5 apm0 at mainbus0 agintc0 at mainbus0 sec shift 3:4 nirq 288 nredist 6 ipi: 0, 1, 2: "interrupt-controller" agintcmsi0 at agintc0 syscon0 at mainbus0: "qos" syscon1 at mainbus0: "qos" syscon2 at mainbus0: "qos" syscon3 at mainbus0: "qos" syscon4 at mainbus0: "qos" syscon5 at mainbus0: "qos" syscon6 at mainbus0: "qos" syscon7 at mainbus0: "qos" syscon8 at mainbus0: "qos" syscon9 at mainbus0: "qos" syscon10 at mainbus0: "qos" syscon11 at mainbus0: "qos" syscon12 at mainbus0: "qos" syscon13 at mainbus0: "qos" syscon14 at mainbus0: "qos" syscon15 at mainbus0: "qos" syscon16 at mainbus0: "qos" syscon17 at mainbus0: "qos" syscon18 at mainbus0: "qos" syscon19 at mainbus0: "qos" syscon20 at mainbus0: "qos" syscon21 at mainbus0: "qos" syscon22 at mainbus0: "qos" syscon23 at mainbus0: "qos" syscon24 at mainbus0: "qos" syscon25 at mainbus0: "power-management" "power-controller" at syscon25 not configured syscon26 at mainbus0: "syscon" "io-domains" at syscon26 not configured syscon27 at mainbus0: "syscon" syscon28 at mainbus0: "syscon" rkclock0 at mainbus0 rkclock1 at mainbus0 syscon29 at mainbus0: "syscon" "io-domains" at syscon29 not configured "usb2-phy" at syscon29 not configured "usb2-phy" at syscon29 not configured rkemmcphy0 at syscon29 rkpinctrl0 at mainbus0: "pinctrl" rkgpio0 at rkpinctrl0 rkgpio1 at rkpinctrl0 rkgpio2 at rkpinctrl0 rkgpio3 at rkpinctrl0 rkgpio4 at rkpinctrl0 pwmreg0 at mainbus0 "pmu_a53" at mainbus0 not configured "pmu_a72" at mainbus0 not configured agtimer0 at mainbus0: 24000 kHz "xin24m" at mainbus0 not configured simplebus0 at mainbus0: "amba" "dma-controller" at simplebus0 not configured "dma-controller" at simplebus0 not configured dwge0 at mainbus0: rev 0x35, address 26:80:27:df:b6:ae rgephy0 at dwge0 phy 0: RTL8169S/8110S/8211 PHY, rev. 6 sdhc0 at mainbus0 sdhc0: SDHC 3.0, 200 MHz base clock sdmmc0 at sdhc0: 8-bit, sd high-speed, mmc high-speed, dma dwmmc0 at mainbus0: 50 MHz base clock sdmmc1 at dwmmc0: 4-bit, dma ehci0 at mainbus0 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 ohci0 at mainbus0: version 1.0 ehci1 at mainbus0 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 ohci1 at mainbus0: version 1.0 "usb" at mainbus0 not configured "usb" at mainbus0 not configured "saradc" at mainbus0 not configured rkiic0 at mainbus0 iic0 at rkiic0 rkiic1 at mainbus0 iic1 at rkiic1 com0 at mainbus0: dw16550, 64 byte fifo com1 at mainbus0: dw16550, 64 byte fifo com1: console "spi" at mainbus0 not configured rktemp0 at mainbus0 rkiic2 at mainbus0 iic2 at rkiic2 rkpwm0 at mainbus0 rkpwm1 at mainbus0 "dmc" at mainbus0 not configured "efuse" at mainbus0 not configured "watchdog" at mainbus0 not configured "rktimer" at mainbus0 not configured rkiic3 at mainbus0 iic3 at rkiic3 rkpmic0 at iic3 addr 0x1b: RK808 pwmbl0 at mainbus0 gpioleds0 at mainbus0: no LEDs "external-gmac-clock" at mainbus0 not configured "sdio-pwrseq" at mainbus0 not configured "vcc1v8-s0" at mainbus0 not configured "dc-12v" at mainbus0 not configured "vcc-sys" at mainbus0 not configured "vcc3v3-sys" at mainbus0 not configured "vcc5v0-host-regulator" at mainbus0 not configured "vcc5v0-typec0-en" at mainbus0 not configured "vcc-phy-regulator" at mainbus0 not configured usb2 at ohci0: USB revision 1.0 uhub2 at usb2 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 configuration 1 interface 0 "Generic OHCI root hub" rev 1.00/1.00 addr 1 scsibus0 at sdmmc0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <Sandisk, DA4064, 0000> removable sd0: 59640MB, 512 bytes/sector, 122142720 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets root on sd0a (deeda2fda40293cd.a) swap on sd0b dump on sd0b