On Wed, 14 Feb 2024 23:29:26 +0100 Mark Kettenis <mark.kette...@xs4all.nl> wrote:
> > Date: Wed, 14 Feb 2024 20:15:25 +0100 > > From: Rob Schmersel <rob.schmer...@bahnhof.se> > > > > On Tue, 13 Feb 2024 14:19:31 +0100 > > Mark Kettenis <mark.kette...@xs4all.nl> wrote: > > > > > You can try to disable ohci by typing "boot -c" at the "boot>" > > > prompt and then "disable ohci" followed by "exit" at the "UKC>" > > > prompt. > > > > > > If that doesn't work, try disabling both "ohci" and "ehci". > > > > > > Cheers, > > > > > > Mark > > > > > > > I did that before I send the mail and it allows the system to boot, > > but I had to redo it today as I had not saved the dmesg :) Here it > > is now: > > Thanks Rob! > <snip old dmesg> > > * network is not cofigured > > Some code is missing. I'll see if I can come up with a diff to test. > > > Would playing around with one of the latest DTB (e.g. from armbian) > > help here? > > Nope. I think everything that doesn't work is because of missing bits > of code in OpenBSD. > > Cheers, > > Mark With the latest changes to the dwq driver the network is now configured : (see: https://marc.info/?l=openbsd-cvs&m=170897377430108&w=2) ... (complete dmesg added to the end of the mail) ... dwqe0 at mainbus0 gmac 1: rev 0x51, address ff:ff:ff:ff:ff:ff ytphy0 at dwqe0 phy 1: YT8531 10/100/1000 PHY, rev. 11 ... And working: opi# ifconfig dwqe0 dwqe0: flags=808843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,AUTOCONF4> mtu 1500 lladdr fe:e1:ba:d0:d2:3c llprio 3 groups: dhcp egress media: Ethernet autoselect (1000baseT full-duplex) status: active inet 192.168.11.24 netmask 0xffffff00 broadcast 192.168.11.255 opi# ping google.com PING google.com (142.250.74.78): 56 data bytes 64 bytes from 142.250.74.78: icmp_seq=0 ttl=55 time=1.672 ms I can install to a connected NVME SSD, but am not able to boot from that as the old u-boot I used to boot armbian from NVME is still in the SPI flash. Looking now how to put the OpenBSD supplied one in the flash; any clue if I can do this OpenBSD? Thanks /Rob PS for completeness sake here is the complete dmesg: # dmesg OpenBSD 7.5-beta (RAMDISK) #97: Tue Feb 27 05:03:40 MST 2024 dera...@arm64.openbsd.org:/usr/src/sys/arch/arm64/compile/RAMDISK real mem = 4022718464 (3836MB) avail mem = 3858149376 (3679MB) User Kernel Config UKC> disable ohci 90 ohci* disabled 147 ohci* disabled 279 ohci* disabled UKC> quit Continuing... random: boothowto does not indicate good seed mainbus0 at root: Xunlong Orange Pi 5 psci0 at mainbus0: PSCI 1.1, SMCCC 1.2, SYSTEM_SUSPEND efi0 at mainbus0: UEFI 2.10 efi0: Das U-Boot rev 0x20240100 smbios0 at efi0: unsupported SMBIOS entry point cpu0 at mainbus0 mpidr 0: ARM Cortex-A55 r2p0 cpu0: 32KB 64b/line 4-way L1 VIPT I-cache, 32KB 64b/line 4-way L1 D-cache cpu0: 128KB 64b/line 4-way L2 cache cpu0: 4096KB 64b/line 16-way L3 cache cpu0: DP,RDM,Atomic,CRC32,SHA2,SHA1,AES+PMULL,LRCPC,DPB,ASID16,PAN+ATS1E1,LO,HPDS,VH,HAFDBS,SBSS "optee" at mainbus0 not configured scmi0 at mainbus0: SCMI 2.0 "gap2" at mainbus0 not configured "gap1" at mainbus0 not configured syscon0 at mainbyscon2 at mainbus0: "syscon" syscon3 at mainbus0: "syscon" syscon4 at mainbus0: "syscon" "usb2-phy" at syscon4 not configured syscon5 at mainbus0: "syscon" "usb2-phy" at syscon5 not configured syscon6 at mainbus0: "syscon" rkclock0 at mainbus0 syscon7 at mainbus0: "power-management" "power-controller" at syscon7 not configured syscon8 at mainbus0: "qos" syscon9 at mainbus0: "qos" syscon10 at mainbus0: "qos" syscon11 at mainbus0: "qos" syscon12 at mainbus0: "qos" syscon13 at mainbus0: "qos" syscon14 at mainbus0: "qos" syscon15 at mainbus0: "qos" syscon16 at mainbus0: "qos" syscon17 at mainbus0: "qos" syscon18 at mainbus0: "qos" syscon19 at mainbus0: "qos" syscon20 at mainbus0: "qos" syscon21 at mainbus0: "qos" syscon22 at mainbus0: "qos" syscon23 at mainbus0: "qos" syscon24 at mainbus0: "qos" syscon25 at mainbus0: "qos" syscon26 at mainbus0: "qos" syscon27 at mainbus0: "qos" syscon28 at mainbus0: "qos" syscon29 at mainbus0: "qos" syscon30 at mainbus0: "qos" syscon31 at mainbus0: "qos" syscon32 at mainbus0: "qos" syscon33 at mainbus0: "qos" syscon34 at mainbus0: "qos" syscon35 at mainbus0: "qos" syscon36 at mainbus0: "qos" syscon37 at mainbus0: "qos" syscon38 scon40 at mainbus0: "qos" syscon41 at mainbus0: "qos" syscon42 at mainbus0: "qos" syscon43 at mainbus0: "qos" syscon44 at mainbus0: "qos" syscon45 at mainbus0: "qos" syscon46 at mainbus0: "qos" syscon47 at mainbus0: "qos" syscon48 at mainbus0: "qos" syscon49 at mainbus0: "qos" syscon50 at mainbus0: "qos" syscon51 at mainbus0: "qos" syscon52 at mainbus0: "qos" syscon53 at mainbus0: "qos" syscon54 at mainbus0: "qos" syscon55 at mainbus0: "qos" agintc0 at mainbus0 mbi shift 4:4 nirq 512 nredist 8: "interrupt-controller" agintcmsi0 at agintc0 agintcmsi1 at agintc0 rkcomphy0 at mainbus0 rkcomphy1 at mainbus0 rkpinctrl0 at mainbus0: "pinctrl" rkgpio0 at rkpinctrl0 rkgpio1 at rkpinctrl0 rkgpio2 at rkpinctrl0 rkgpio3 at rkpinctrl0 rkgpio4 at rkpinctrl0 syscon56 at mainbus0: "syscon" syscon57 at mainbus0: "syscon" syscon58 at mainbus0: "syscon" syscon59 at mainbus0: "syscon" syscon60 at mainbus0: "syscon" "fit-images" at mainbus0 not configured "firmware" at mainbus0 not configured "pmu-a55" at mainbus0 not configured "pmu-a76" at mainbus0 not configured "clock-0" at mainbus0 not configured agtimer0 at mainbus0: 24000 kHz "clock-1" at mainbus0 not configured "clock-2"configured ehci0 at mainbus0 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 "usb" at mainbus0 not configured ehci1 at mainbus0 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Generic EHCI root hub" rev 2.00/1.00 addr 1 "usb" at mainbus0 not configured "sram" at mainbus0 not configured rkiic0 at mainbus0 iic0 at rkiic0 "rockchip,rk8602" at iic0 addr 0x42 not configured "rockchip,rk8603" at iic0 addr 0x43 not configured dwpcie0 at mainbus0 dwqe0 at mainbus0 gmac 1: rev 0x51, address ff:ff:ff:ff:ff:ff ytphy0 at dwqe0 phy 1: YT8531 10/100/1000 PHY, rev. 11 "spi" at mainbus0 not configured dwmmc0 at mainbus0: 49 MHz base clock sdmmc0 at dwmmc0: 4-bit, sd high-speed, dma "dma-controller" at mainbus0 not configured "dma-controller" at mainbus0 not configured rkiic1 at mainbus0 iic1 at rkiic1 "rockchip,rk8602" at iic1 addr 0x42 not configured "timer" at mainbus0 not configured "watchdog" at mainbus0 not configured "spi" at mainbus0 not configured com0 at mainbus0: dw16550, 64 byte fifo com0: console "tsadc" at mainbus0 not configured "adc" at mainbus0 not configured rkiic2 at mainbus0 iic2 at rkiic2 pcxrtcattery low "efuse" at mainbus0 configured "video-codec" at mainbus0 not configured "adc-keys" at mainbus0 not configured "leds" at mainbus0 not configured "vbus-typec-regulator" at mainbus0 not configured "vcc5v0-sys-regulator" at mainbus0 not configured "vcc-3v3-sd-s0-regulator" at mainbus0 not configured "vcc3v3-pcie20-regulator" at mainbus0 not configured "binman" at mainbus0 not configured "dmc" at mainbus0 not configured "syscon" at mainbus0 not configured "syscon" at mainbus0 not configured "syscon" at mainbus0 not configured pci0 at dwpcie0 ppb0 at pci0 dev 0 function 0 "Rockchip RK3588" rev 0x00 pci1 at ppb0 bus 65 nvme0 at pci1 dev 0 function 0 unknown vendor 0x1d79 product 0x2263 rev 0x03: msix, NVMe 1.3 nvme0: TS512GMTE400S, firmware V0804S3, serial H722140026 scsibus0 at nvme0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <NVMe, TS512GMTE400S, V080> sd0: 488386MB, 512 bytes/sector, 1000215216 sectors scsibus1 at sdmmc0: 2 targets, initiator 0 sd1 at scsibus1 targ 1 lun 0: <SD/MMC, EB1QT, 0030> removable sd1: 30528MB, 512 bytes/sector, 62521344 sectors softraid0 at root scsibus2 at softraidon rd0b dump on rd0b WARNING: bad clock chip time WARNING: CHECK AND RESET THE DATE!
