I am not referring to the fact that you have to rebuild the server caches after 
installing Migrator 7.6.04 - I have been doing that around the clock for two 
days now.  I'm referring to the implication in the documentation that if I now 
create a new customization in an overlay, it will not appear correctly in the 
migrator cache when you open the server and update the cache (which Migrator 
does automatically) because of a known defect, and to get it to appear 
correctly you have to DELETE the existing cache and force it to build a new 
one, which takes 7 or 8 hours or more for a fully loaded ITSM server.  Until 
then, you would not be able to get an accurate difference report, and it might 
make it difficult to migrate the changes, which would negate any possible 
benefit of using the tool.  It begs the question of why it was even released in 
this condition, although with my brief experience to date that is consistent 
with the code quality of the rest of the 7.6.04 line.

Christopher Strauss, Ph.D.
Call Tracking Administration Manager
University of North Texas Computing & IT Center
http://itsm.unt.edu/
From: Action Request System discussion list(ARSList) 
[mailto:[email protected]] On Behalf Of Rick Cook
Sent: Wednesday, February 16, 2011 9:21 AM
To: [email protected]
Subject: Re: Migrator 7.6.04 Incredibly slow login process

**

Actually, it makes sense that we would have to recache the server definitions, 
at least those on 7.6.04.  The old ones were run on the pre-overlay API set, 
and the new tools wouldn't be able to use their full functionality without a 
new cache.  That being said, you should be able to use the old cache for any 
process that isn't new in 7.6.04.

Rick
On Feb 15, 2011 2:42 PM, "strauss" <[email protected]<mailto:[email protected]>> 
wrote:
> I went back and re-read the release and installation notes on Migrator 7.6.04 
> to see if I had missed something (apparently not, although they recommend 
> never upgrading an earlier install even though the installer will do it 
> without complaint), and I spotted an interesting issue in the Known Issues 
> section - SW00386826. Apparently, if you have loaded a server (cached it) in 
> Migrator, which by the way takes HOURS and HOURS per server (the one I 
> started this morning at 10 AM after posting the message below - and after a 
> half hour of logging in - is just now finishing up the 45,845 Active Links at 
> almost the 5 hour mark) then this release of migrator will not populate the 
> correct Customization Type for any overlay that you add after the initial 
> cache. The only work-around is to delete the entire cache for that server and 
> re-cache!
>
> So, if you have cached a server (and I always do at each step of the 
> installation process), and then add an overly with a customization, you won't 
> be able to correctly add that object to the cache per the statements on pg 43 
> of the Migrator Guide, and I guess you won't be able to properly migrate it 
> from development to production without first recreating your entire cache for 
> that server? If that is true, if you think Robert's patience is wearing thin 
> with Developer Studio, wait until he has to re-cache the development server 
> before he can migrate the overly!!
>
> Or maybe you CAN migrate it, but it just won't show up correctly in either 
> the current server window or any difference reports until you force a 
> complete re-cache of the development server - and possibly also on the 
> destination server as well. That CAN'T be right...
>
> Christopher Strauss, Ph.D.
> Call Tracking Administration Manager
> University of North Texas Computing & IT Center
>
> -----Original Message-----
> From: Action Request System discussion list(ARSList) 
> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of strauss
> Sent: Tuesday, February 15, 2011 9:55 AM
> To: [email protected]<mailto:[email protected]>
> Subject: Migrator 7.6.04 Incredibly slow login process
>
> Has anyone tried out Migrator 7.6.04?? I use migrator constantly to take 
> object count snapshots after installing or upgrading each component of the 
> ITSM Suite "stack", as well as to locate differences in forms and workflow, 
> so I tend to notice differences between versions. The 7.6.03 version was 
> trouble-free and reliable for what I was using it for, especially compared to 
> earlier releases of various 7.5 versions.
>
> Several days ago I upgraded the Migrator on my Vista box from 7.6.03 to 
> 7.6.04, and it simply refuses to log in (I normally log in as Demo without 
> specifying a preference server; I store the licenses in a file, not on a 
> server). I never got it to log in at all - possibly because I never let it 
> sit spinning into oblivion long enough (like it is right now). I completely 
> uninstalled it and installed a clean copy of 7.6.04, in hopes that it was 
> just one of those versions of a BMC product that cannot successfully upgrade 
> the previous version (there have been many), but saw the same endless login. 
> Eventually I found it popped up an Error 90 "Cannot establish a network 
> connection to the AR System server <server.name<http://server.name>> : RPC: 
> Rpcbind failure - RPC: Timed out" Yesterday I saw that it was failing on one 
> of the servers on the list in Accounts that was not running, something the 
> never stopped the 7.6.03 Migrator (and still doesn't - I immediately got 
> logged using Migrator 7.6.03 on a Windows 7 VM on my Mac). I tried disabling 
> some of the servers on the account list (has 7 servers listed) and finally 
> got in, although that removes them from the list of servers you can load so 
> is not very useful. It's like the 7.6.03 Migrator authenticates to the first 
> server that responds and is ready for use, but 7.6.04 tries to log in to 
> every server in the accounts list. I guess that would be okay if it actually 
> worked.
>
> Today the Migrator 7.6.04 gives the RPC bind failure for a 7.6.04 server that 
> IS running, and IS able to be logged in to from the same workstation with the 
> 7.6.04 User Tool. When I clear the error it wanders off again into 
> never-never land (it's still there).
>
> Since Migrator 7.6.04 is a primary tool for the new Delta Data Migration 
> Server process that I want to test, this gives me an early indication that 
> such an enterprise is doomed to failure. This release of the Migrator appears 
> to be dead on arrival.
>
> I'll eventually open an Issue on it, but I am in no hurry since support does 
> not seem to be alive these days; none of the new 7.6.04 Issues I opened on 
> Friday (new install of ARS 7.6.04 failed to create the arsystem.tag file, and 
> complains about it in the arerror.log on every startup) or Saturday (AR 
> Server upgraded from 7.6.03 to 7.6.04 now crashes the EA thread 390695 7 
> minutes after any server restart, after which AREA LDAP authentication does 
> not work until the AR Server service is manually restarted.) have been 
> responded to at all. They did respond to my report that NONE of the problems 
> I had identified with all of the online help file installations in 7.6.03 
> (Atrium, ITSM, SLM, SRM, RKM) had been fixed in 7.6.04 - it is all still 
> hopelessly broken at the installer and/or functional level; but that Issue 
> was from last November.
>
> I'm just not feeling the love from 7.6.04 after several weeks of pounding on 
> it, and certainly not from support. The Migrator finally finished logging in 
> after complaining once more about not being able to connect to another server 
> - the production ARS 7.1 server, which absolutely is up and running or I 
> wouldn't be sitting here writing emails.
>
> Christopher Strauss, Ph.D.
> Call Tracking Administration Manager
> University of North Texas Computing & IT Center
>
> _______________________________________________________________________________
> UNSUBSCRIBE or access ARSlist Archives at 
> www.arslist.org<http://www.arslist.org>
> attend wwrug11 www.wwrug.com<http://www.wwrug.com> ARSList: "Where the 
> Answers Are"
>
> _______________________________________________________________________________
> UNSUBSCRIBE or access ARSlist Archives at 
> www.arslist.org<http://www.arslist.org>
> attend wwrug11 www.wwrug.com<http://www.wwrug.com> ARSList: "Where the 
> Answers Are"
_attend WWRUG11 www.wwrug.com ARSlist: "Where the Answers Are"_

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
attend wwrug11 www.wwrug.com ARSList: "Where the Answers Are"

Reply via email to