That used to work on the Admin tool on character fields, but didn't work on
the early releases of the Dev Studio..
Joe
-----Original Message-----
From: Luttmann, Michael W Mr CTR DISA CD553
Sent: Wednesday, March 30, 2011 5:49 PM Newsgroups:
public.remedy.arsystem.general
To: arslist@ARSLIST.ORG
Subject: Re: Developer Studio and Radio Button Height
When I have trouble with default field height (radio button or character
field), I find it helpful to temporarily set the height to 2 lines, then set
it back to 1. That usually works.
Mike Luttmann
DISA Remedy Engineer
-----Original Message-----
From: Action Request System discussion list(ARSList)
[mailto:arslist@ARSLIST.ORG] On Behalf Of Lyle Taylor
Sent: Wednesday, March 30, 2011 13:02
To: arslist@ARSLIST.ORG
Subject: Re: Developer Studio and Radio Button Height
**
I'm using 7.6.03. Like Andrew, I see this when I try to align and size
things similarly using the toolbar buttons. I haven't yet tried fiddling
with the other properties to see if it would pop back, though. I'll give
that a try.
Thanks,
Lyle
From: Action Request System discussion list(ARSList)
[mailto:arslist@ARSLIST.ORG] On Behalf Of Andrew Fremont
Sent: Wednesday, March 30, 2011 11:13 AM
To: arslist@ARSLIST.ORG
Subject: Re: Developer Studio and Radio Button Height
** I'm having the same issue on the selection field on DS 7.5. P004
This happen on selecting multiple fields then using the "Align Left" and
"Size Label" button from the menu bar.
To restore the hight on the selection fields, I have to change some of the
display properties on width, alignment...
On Tue, Mar 29, 2011 at 9:24 PM, Joe Martin D'Souza <jdso...@shyle.net>
wrote:
**
What version of the studio are you on?
I used to have this problem on the very early versions of the Studio and
found it frustrating as well.. It was then later corrected on later
versions..
Joe
From: Lyle Taylor <mailto:tayl...@ldschurch.org>
Sent: Tuesday, March 29, 2011 8:24 PM
Newsgroups: public.remedy.arsystem.general
To: arslist@ARSLIST.ORG
Subject: Developer Studio and Radio Button Height
**
Hi All,
I'm having a problem with DS where when I modify the layout of a radio
button, it changes the height to 14 pixels, which cuts off the lower portion
of the radio button. The height property for the field is grayed out, so I
can't adjust it back to something reasonable. Has anyone else had this
problem? Any idea how to fix it?
Thanks,
Lyle Taylor
NOTICE: This email message is for the sole use of the intended recipient(s)
and may contain confidential and privileged information. Any unauthorized
review, use, disclosure or distribution is prohibited. If you are not the
intended recipient, please contact the sender by reply email and destroy all
copies of the original message.
_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
attend wwrug11 www.wwrug.com ARSList: "Where the Answers Are"