I would consult with your network team for duplex settings. Reason being, your switches or routers may be set for something other than full duplex. If your servers' NIC contradicts this it will cause severe packet loss and increased collisions. Solaris servers "should":auto negotiate out of the box.
We have a system that reaches across two VLANs. This is similar to setting up the Distributed Server Option with the CMDB. You can do this there just has to be some route analysis take place. Certain firewall rules have to be created, etc.. Again, usually accomplished by your network/firewall team. ________________________________ From: patchsk <vamsi...@gmail.com> To: arslist@ARSLIST.ORG Sent: Wednesday, October 5, 2011 12:46 AM Subject: Re: Separation of DB and Application server ** Also make sure your ars and db are with in same LAN and it is configured for full duplex. _attend WWRUG11 www.wwrug.com ARSlist: "Where the Answers Are"_ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org attend wwrug11 www.wwrug.com ARSList: "Where the Answers Are"