Thanks, Load balancer : F5 6400’s. All servers are virtual under VMware platform except for Oracle DB. OS: Windows 2012. (There are discussions running Linux on WebServers and Mid-tier.)
All serves with a fixed IP address. Network servers: All servers within the same data ware house. Network local users: shall reach it via the ASPAN (Area Service Pan-European Network) and VPN’s. ( via either the Cisco VPN concentrator or Checkpoint firewalls.) I tried to use http://<mid-tier server>/arsys/samples/StatusCheck.jsp a few yeas back. I found it incomplete and undocumented. There must be a better way of doing this? Thanks, Terje From: Action Request System discussion list(ARSList) on behalf of Thad Esser Sent: 10 April 2013 05:10 AM To: arslist@ARSLIST.ORG Subject: Re: Health Check for load balancer? ** Terje, http://<mid-tier server>/arsys/samples/StatusCheck.jsp has been there since at least 7.1 and probably earlier. It will return a simple "200 OK" if everything is good. Your load balancer can use that to validate a healthy node. Thad On Tue, Apr 9, 2013 at 8:57 PM, Axton <axton.gr...@gmail.com> wrote: ** Lots of variables that go into answering that question. Most of the variables are specific to your environment. The more information you can share about your current configuration, the better your answers will be. For example: - What type of LB are you using? - How are the networks around the LB arranged? - Are the machines in the VIP multi-homed? Typically, people want the load balancer to check the health of each individual node so that the load balancer can automatically remove nodes in the event they fail. On Tue, Apr 9, 2013 at 4:17 PM, Terje Moglestue <te...@mogle.com> wrote: Folks, My infrastructure team want to build a Health Check procedure that checks all the nodes behind the load balancer. If we just sent a URL request to the LB in front of the mid-tier servers, we do not know which path the request will go. How can be best determine the path? We could implement a servlet in the mid-tier tomcat that connects to each AR Server. If LB routes the sessions depending on the TCP port (e.g. port 2001 goes to AR Server node 1, port 2002 to AR Server 2 etc.) we could have a simple servlet with 2 parameters: Server name (which is always the LB alias) and port (allows us to choose the AR Server we want to check). The servlet should implement one or more API calls to the AR Server, e.g. retrieve data from a table. We might be able to implement this as a JSP. Have anyone done this? Or is the another simple solution out there? Thanks, Terje _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years" _ARSlist: "Where the Answers Are" and have been for 20 years_ _ARSlist: "Where the Answers Are" and have been for 20 years_ _______________________________________________________________________________ UNSUBSCRIBE or access ARSlist Archives at www.arslist.org "Where the Answers Are, and have been for 20 years"