There is a whole section on the integration guide that talks about certain
limitations Remedy has while consuming web services that have complex types.
I would encourage you to read the integration guide, the section that talks
about web services. Since you seem somewhat familiar with the concept, you
could skip the first few pages of that section and dive straight into the
limitations part.

 

I think you will (again if Serena has better web service capabilities to
consume) have better luck publishing a web service attached to that form you
have created to Get List, and then have Serena read from that list and
create in its database. You might also have to publish a Set Operation so it
can mark records it has already processed as 'processed'.

 

This I think will be a lot more simpler, (though might not quite be real
time) than modifying the envelopes that Remedy would need to send, in order
to create information in Serena considering you have having problems with
certain complex constructs..

 

Joe

 

  _____  

From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Abdullah Baytops
Sent: Wednesday, April 17, 2013 10:18 AM
To: [email protected]
Subject: Re: WebServices from ITSM to SERENA

 

Exactly in which I have created the filter that is sending to SERENA
accessing the SERENA WSDL they provided.  A few questions I have is does
Remedy do any specific parsing of XML information when it reads from another
WSDL that is using complex types.  The WSDL XML has some information in the
header file in which uses a reference to provide information that is
essential to accessing the SERENA in which I do notice that certain things
are being omitted when it is processed by the Remedy WSDL that access the
external WSDL. 

When I run the WSDL with SoapUi it will create the ticket/event inside the
SERENA system but when that same information is accessed using through BMC
looking at the WSDL provided by SERENA it fails.  So I used Wireshark to see
what fields and elements are accessed from the WSDL Remedy uses that SERENA
created and I noticed that a tname space element is not completed and being
moved from the header into another area. I have included the delta in the
XMl that I noticed which listed below and highlighted:

Here are the logs of the soap errors that we have encountered.

Remedy_serena.out is the wireshark capture of the message sent by remedy
to serena. This generates an unknown error.

soapUI_serena_working.log shows soapUI's interpretation of the wsdl that
is fully working, we are receiving the expected error with this message.

soapUI_serena_error_exact.log shows the exact message replicated in
soapui to produce the same error

soapUI_serena_error_exact_fixed.log shows the same message that remedy
uses with one modification that causes it to work (the version on the
ns0: ALFEventNoticeDoc tag)

 

V/R
Abdul Baytops

 

  _____  

From: Action Request System discussion list(ARSList) [[email protected]]
on behalf of Grooms, Frederick W [[email protected]]
Sent: Wednesday, April 17, 2013 9:36 AM
To: [email protected]
Subject: Re: WebServices from ITSM to SERENA

** 

You have to remember that Web Services do nothing by themselves.   A Web
Service is always responding to some outside call.

 

If you want to push data to SERENA you would have a web service in SERENA
(to accept the data) and you use a Filter set fields (with data source of
Web Service) action to push the data over.

 

Fred

 

 

From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Abdullah Baytops
Sent: Wednesday, April 17, 2013 8:15 AM
To: [email protected]
Subject: Re: WebServices from ITSM to SERENA

 

** 

Almost. Here is what we are trying to do:

We have created a custom Remedy form in which capturing information from
gathered from several ITSM forms.  that information needs to be sent to
SERENA.  I created a WSDL using a "CREATE" function that will send that
information to SERENA but it is failing for some odd reason.   Should I use
"CREATE" or should it be using a "GET" function to perform this task. Any
insight would be greatly appreciated.

 

V/R
Abdul Baytops

 

  _____  

From: Action Request System discussion list(ARSList) [[email protected]]
on behalf of Joe D'Souza [[email protected]]
Sent: Tuesday, April 16, 2013 3:26 PM
To: [email protected]
Subject: Re: WebServices from ITSM to SERENA

** 

Let me take a stab at this. If I understood you right, you have published a
web service in Remedy that allows 'the world' (SERENA in your case) to
consume, by searching Remedy using a Get List Operation.

 

What do you mean by once it hits the other server, the information is not
accepted?

 

Have you tested your web service that you published using a standard testing
tool such as SoapSonar or soapUI?

 

What do you see on your arjavaplugin log?

 

Joe

 

  _____  

From: Action Request System discussion list(ARSList)
[mailto:[email protected]] On Behalf Of Abdullah Baytops
Sent: Tuesday, April 16, 2013 1:49 PM
To: [email protected]
Subject: WebServices from ITSM to SERENA

 

I am having a problem with a webservice that I have created going from ITSM
to SERENA.  I have created a webservice that is sending information from our
system to SERENA in which alI have verified all the information is being
sent across the network by using "WireShark"  The problem is that once it
hits the other server the information is not being accepted.  I also notice
the password being sent get encrypted  while being sent.  Is there anyone
has ran into this problem with such an integration or have any insight they
can provide on this issue.

 

V/R
Abdul Baytops

 

 

 

_ARSlist: "Where the Answers Are" and have been for 20 years_ 

_ARSlist: "Where the Answers Are" and have been for 20 years_

_______________________________________________________________________________
UNSUBSCRIBE or access ARSlist Archives at www.arslist.org
"Where the Answers Are, and have been for 20 years"

Reply via email to