Philip, If problem still exists, 1) Do all Paul recommended
2) Do what Jeff Murphy advised me: > Note (probably harmless): No library found for -licuucbmc > Note (probably harmless): No library found for -licui18nbmc > Note (probably harmless): No library found for -licudatabmc You need to track down those libraries and make sure they are located somewhere where make will find them (eg where ever libar is) I basically copied these files from ../ars/bin to ../api/lib ted.... From: Paul Blasquez [mailto:[email protected]] Sent: Thursday, October 11, 2012 2:48 PM To: ARSperl User Discussion Subject: Re: [Arsperl-users] Arsperl-users Digest, Vol 61, Issue 4 Philip, I would verify that everything is indeed 32bit with the 'file' utility, especially your perl binary. You may find that it is 64bit even though you did not set the 64bit compile flag. If I recall correctly, I had to add the -m32 flag to all perl compile lines (some were buried beyond the configuration section of the makefile) and use a custom library path that only had 32bit libraries on this step. Also, I did not see any -m32 options in your ARSPerl compile lines so I you will probably need to add those once your 32bit perl is confirmed. It is actually a bit tricky to force 32 bit compilation in a 64 bit environment so you must double-check. -Paul On Thu, Oct 11, 2012 at 12:00 PM, Philip Wilson <[email protected]<mailto:[email protected]>> wrote: OK, I recompiled everything as 32bit. Same exact issue. Any other ideas? Here is a transcript: $ perl -V Summary of my perl5 (revision 5 version 16 subversion 0) configuration: Platform: osname=solaris, osvers=2.10, archname=sun4-solaris uname='sunos prescs07 5.10 generic_147440-11 sun4u sparc sunw,sun-fire-v240 ' config_args='' hint=recommended, useposix=true, d_sigaction=define useithreads=undef, usemultiplicity=undef useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef use64bitint=undef, use64bitall=undef, uselongdouble=undef usemymalloc=n, bincompat5005=undef Compiler: cc='gcc', ccflags ='-fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV', optimize='-O', cppflags='-fno-strict-aliasing -pipe' ccversion='', gccversion='3.4.3 (csl-sol210-3_4-branch+sol_rpath)', gccosandvers='solaris2.10' intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321 d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16 ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8 alignbytes=8, prototype=define Linker and Libraries: ld='gcc', ldflags =' ' libpth=/usr/lib /usr/ccs/lib libs=-lsocket -lnsl -ldl -lm -lc perllibs=-lsocket -lnsl -ldl -lm -lc libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a gnulibc_version='' Dynamic Linking: dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' ' cccdlflags='-fPIC', lddlflags='-G' Characteristics of this binary (from libperl): Compile-time options: HAS_TIMES PERLIO_LAYERS PERL_DONT_CREATE_GVSV PERL_MALLOC_WRAP PERL_PRESERVE_IVUV PERL_USE_SAFE_PUTENV USE_LARGE_FILES USE_LOCALE USE_LOCALE_COLLATE USE_LOCALE_CTYPE USE_LOCALE_NUMERIC USE_PERLIO USE_PERL_ATOF Built under solaris Compiled at Oct 11 2012 12:30:46 @INC: /production/77j/perl32/lib/site_perl/5.16.0/sun4-solaris /production/77j/perl32/lib/site_perl/5.16.0 /production/77j/perl32/lib/5.16.0/sun4-solaris /production/77j/perl32/lib/5.16.0 . $ perl Makefile.PL found API Version: 18 derived server version from ar.h: found ar libraries: $VAR1 = []; Building against perl 5.016000 Generating support.h file.. Processing AR_STRUCT_ITEM codes.. Processing AR_SERVER_STAT codes.. Processing AR_SCHEMA codes.. Processing AR_COM_PARM codes.. Processing AR_COM_METHOD codes.. Processing AR_DDE codes.. Processing AR_ACTIVE_LINK_ACTION codes.. Processing AR_ACTIVE_LINK_ACTION_OPEN codes.. Processing AR_CHAR_MENU_DD type codes.. Processing AR_CHAR_MENU_DD name codes.. Processing AR_CHAR_MENU_DD value format.. Processing AR_CHAR_MENU codes.. Processing AR_FILTER_ACTION codes.. Processing AR_MENU_REFRESH codes.. Processing AR_PERMISSIONS (Schema) codes.. Processing AR_PERMISSIONS (Field) codes.. Processing AR_DATA_TYPE codes.. Processing AR_BYTE_LIST codes.. Processing AR_NO_MATCH codes.. Processing AR_MULTI_MATCH codes.. Processing AR_RETURN codes.. Processing AR_FUNCTION codes.. Processing ARCON codes.. Processing ARCONOWNER codes.. Processing ARREF codes.. Processing AR_KEYWORD codes.. Processing AR_SERVER_INFO codes.. Processing AR_SIGNAL codes.. Generating serverTypeInfoHints.h .. Converting C header files to perl modules .. Configuring with options: ARSVERSION = 7.60 ARSAPI = /tools/bmc/remedy/api AUTODEFINES = -g -Wno-unused-variable -Wuninitialized -DGETLISTGROUP_OLD_STYLE -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16 -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 Note (probably harmless): No library found for -licuucbmc Note (probably harmless): No library found for -licui18nbmc Note (probably harmless): No library found for -licudatabmc Writing Makefile for ARS Writing MYMETA.yml and MYMETA.json === ARSperl 'make test' configuration. === Please enter the following information. This information will be recorded in ./t/config.cache If you want to skip the 'make test' step, just hit ENTER three times. You can configure it later by either re-running 'perl Makefile.PL' or by editting ./t/config.cache Fair warning: you probably don't want to run 'make test' against a production ARSystem server. Server Name []: Admin Username []: Admin Password []: TCP Port [0]: Type 'make' (windows: 'nmake') to build ARSperl. Type 'make test' to test ARSperl before installing. Type 'make install' to install ARSperl. $ make cp ARS/arerrno-h.pm<http://arerrno-h.pm> blib/lib/ARS/arerrno-h.pm<http://arerrno-h.pm> Skip blib/lib/ARS/OOsup.pm (unchanged) cp ARS/ar-h.pm<http://ar-h.pm> blib/lib/ARS/ar-h.pm<http://ar-h.pm> Skip blib/lib/ARS/nparm.pm<http://nparm.pm> (unchanged) Skip blib/lib/ARS/OOmsgs.pm (unchanged) Skip blib/lib/ARS/OOform.pm (unchanged) cp ARS.pm blib/lib/ARS.pm AutoSplitting blib/lib/ARS.pm (blib/lib/auto/ARS) /production/77j/perl32/bin/perl /production/77j/perl32/lib/5.16.0/ExtUtils/xsubpp -typemap /production/77j/perl32/lib/5.16.0/ExtUtils/typemap -typemap typemap ARS.xs > ARS.xsc && mv ARS.xsc ARS.c gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC "-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" -g -Wno-unused-variable -Wuninitialized -DGETLISTGROUP_OLD_STYLE -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16 -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 ARS.c ARS.c: In function `XS_ARS_ars_GetListContainer': ARS.xs:1197: warning: 'ret' might be used uninitialized in this function gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC "-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" -g -Wno-unused-variable -Wuninitialized -DGETLISTGROUP_OLD_STYLE -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16 -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 support.c gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC "-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" -g -Wno-unused-variable -Wuninitialized -DGETLISTGROUP_OLD_STYLE -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16 -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 supportrev.c gcc -c -I/tools/bmc/remedy/api/include -fno-strict-aliasing -pipe -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -O -DVERSION=\"1.93\" -DXS_VERSION=\"1.93\" -fPIC "-I/production/77j/perl32/lib/5.16.0/sun4-solaris/CORE" -g -Wno-unused-variable -Wuninitialized -DGETLISTGROUP_OLD_STYLE -DARS32 -DARS452 -DPERL_PATCHLEVEL_IS=16 -DPERL_SUBVERSION_IS=0 -DPERL_BASEREV_IS=50 supportrev_generated.c Running Mkbootstrap for ARS () chmod 644 ARS.bs rm -f blib/arch/auto/ARS/ARS.so LD_RUN_PATH="/usr/lib" gcc -G ARS.o support.o supportrev.o supportrev_generated.o -o blib/arch/auto/ARS/ARS.so /tools/bmc/remedy/api/lib/libar.a \ -L/tools/bmc/remedy/api/lib -lnsl -lpthread \ chmod 755 blib/arch/auto/ARS/ARS.so cp ARS.bs blib/arch/auto/ARS/ARS.bs chmod 644 blib/arch/auto/ARS/ARS.bs $ make test PERL_DL_NONLAZY=1 /production/77j/perl32/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t t/00connect.t ........... Can't load '/production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so' for module ARS: ld.so.1: perl: fatal: relocation error: file /production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so: symbol ucnv_setDefaultName_3_2: referenced symbol not found at /production/77j/perl32/lib/5.16.0/sun4-solaris/DynaLoader.pm line 190. at t/00connect.t line 12. Compilation failed in require at t/00connect.t line 12. BEGIN failed--compilation aborted at t/00connect.t line 12. t/00connect.t ........... Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run t/01import.t ............ Can't load '/production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so' for module ARS: ld.so.1: perl: fatal: relocation error: file /production/77j/stage/ars/ARSperl-1.93/blib/arch/auto/ARS/ARS.so: symbol ucnv_setDefaultName_3_2: referenced symbol not found at /production/77j/perl32/lib/5.16.0/sun4-solaris/DynaLoader.pm line 190. at t/01import.t line 7. Compilation failed in require at t/01import.t line 7. BEGIN failed--compilation aborted at t/01import.t line 7. t/01import.t ............ Dubious, test returned 255 (wstat 65280, 0xff00) No subtests run ^C ---------- Forwarded message ---------- From: Paul Blasquez <[email protected]<mailto:[email protected]>> To: ARSperl User Discussion <[email protected]<mailto:[email protected]>> Cc: Date: Tue, 9 Oct 2012 14:33:29 -0700 Subject: Re: [Arsperl-users] arsperl compile issue Hi Philip, It looks to me that you tried to compile as 64bit. Your compile output had quite a few incompatible type errors and unfortunately those are fatal during runtime. As far as I know, nobody has successfully compiled ARSPerl as 64bit.. The only method I am aware of by which you can install ARSPerl in a 64bit environment is using a custom 32bit perl with all compiler lines (for both compiling the custom perl and the ARSPerl) having the argument of -m32 and having a 32bit version of all libraries in the library path. I just did this recently (about a month ago) and I was able to get it running as 32bit perl/ARSPerl on a 64bit OS. Hope this helps. -Paul On Tue, Oct 9, 2012 at 1:59 PM, Philip Wilson <[email protected]<mailto:[email protected]>> wrote: I have the LD_LIBRARY_PATH variable set: $ echo $LD_LIBRARY_PATH /oracle/g01/software/rdbms/11.2.0.3/lib:/tools/bmc/remedy/bin:/tools/bmc/remedy/api/lib:/tools/bmc/remedy/arealdap:/tools/bmc/remedy/ardbcldap:/oracle/g01/software/rdbms/11.2.0.3/lib:/tools/java16/jre/lib/sparc/server:/tools/java16/jre/bin:/tools/java16/jre/lib/sparc/native_threads:/production/77j/customperl/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS/ARS.so:/production/77j/customperl/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS<http://11.2.0.3/lib:/tools/bmc/remedy/bin:/tools/bmc/remedy/api/lib:/tools/bmc/remedy/arealdap:/tools/bmc/remedy/ardbcldap:/oracle/g01/software/rdbms/11.2.0.3/lib:/tools/java16/jre/lib/sparc/server:/tools/java16/jre/bin:/tools/java16/jre/lib/sparc/native_threads:/production/77j/customperl/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS/ARS.so:/production/77j/customperl/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS> $ ./testars11.pl<http://testars11.pl/> Can't load '/production/77j/customperl/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS/ARS.so' for module ARS: ld.so.1: perl: fatal: relocation error: file /production/77j/customperl/lib/site_perl/5.16.0/sun4-solaris-64/auto/ARS/ARS.so: symbol ucnv_setDefaultName_3_2: referenced symbol not found at /production/77j/customperl/lib/5.16.0/sun4-solaris-64/DynaLoader.pm line 190. at ./testars11.pl<http://testars11.pl/> line 5. Compilation failed in require at ./testars11.pl<http://testars11.pl/> line 5. BEGIN failed--compilation aborted at ./testars11.pl<http://testars11.pl/> line 5. ------------------------------------------------------------------------------ Don't let slow site performance ruin your business. Deploy New Relic APM Deploy New Relic app performance management and know exactly what is happening inside your Ruby, Python, PHP, Java, and .NET app Try New Relic at no cost today and get our sweet Data Nerd shirt too! http://p.sf.net/sfu/newrelic-dev2dev -- Arsperl-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/arsperl-users ------------------------------------------------------------------------------ Don't let slow site performance ruin your business. Deploy New Relic APM Deploy New Relic app performance management and know exactly what is happening inside your Ruby, Python, PHP, Java, and .NET app Try New Relic at no cost today and get our sweet Data Nerd shirt too! http://p.sf.net/sfu/newrelic-dev2dev _______________________________________________ Arsperl-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/arsperl-users ------------------------------------------------------------------------------ Don't let slow site performance ruin your business. Deploy New Relic APM Deploy New Relic app performance management and know exactly what is happening inside your Ruby, Python, PHP, Java, and .NET app Try New Relic at no cost today and get our sweet Data Nerd shirt too! http://p.sf.net/sfu/newrelic-dev2dev -- Arsperl-users mailing list [email protected]<mailto:[email protected]> https://lists.sourceforge.net/lists/listinfo/arsperl-users
------------------------------------------------------------------------------ LogMeIn Central: Instant, anywhere, Remote PC access and management. Stay in control, update software, and manage PCs from one command center Diagnose problems and improve visibility into emerging IT issues Automate, monitor and manage. Do more in less time with Central http://p.sf.net/sfu/logmein12331_d2d
-- Arsperl-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/arsperl-users
