Untuk HP Deskjet 3920 dan Canon S200 belum diinfokan
nih

--- Poetra <[EMAIL PROTECTED]> wrote:

> maaf mas...., bukan maksudnya "menggunting dalam
> lipatan", tapi cuma mo  sedikit berbagi.....
> mudah-mudahan berguna..... untuk yang butuh 
> software resetternya... tunggu ajah yah.....
> sabar....
>   
>   Canon PIXMA iP1000
>   Waste Ink Counter Reset Manual for Service mode
>   
>   1. Turn off the printer. And disconnect the
> printer cable.
>   2. Press and hold the POWER button, turn on the
> printer.
>   3. The indicator (L.E.D.) should be green.
>   4. Press and release the RESUME button , the
> indicator (L.E.D.) should be orange.
>   5. Press and release the RESUME button again, the
> indicator (L.E.D.) should be green.
>   6. Release both buttons.
>   
>   ++++++++++++++++++++++++++++++++++++++++++++++++++
>   
>   Canon PIXMA iP1500
>   Waste Ink Counter Reset. Manual for Service mode
>   
>   1. Turn off the printer. And disconnect the
> printer cable.
>   2. Press and hold the POWER button, turn on the
> printer.
>   3. The indicator (L.E.D.) should be green.
>   4. Press and release the RESUME button , the
> indicator (L.E.D.)
>   should be orange.
>   5. Press and release the RESUME button again, the
> indicator
>   (L.E.D.) should be green
>   6. Release both buttons
>   
>   ++++++++++ ++++++++++ ++++++++++ ++++++++++
> ++++++++++
>   
>   Canon i320, i255
>   Waste Ink Counter Reset.
>   Step 1 : Manual Temporary
>   1. Unplug power and USB.
>   2. Open door and hold power button.
>   3. Connect power.
>   4. Close door, then release power button.
>   or Step 1: Manual Temporary
>   1. Turn off the printer. And disconnect the
> printer cable.
>   2. Press and hold the POWER button, turn on the
> printer.
>   3. The indicator (L.E.D.) should be green.
>   4. Press and release the RESUME button , the
> indicator (L.E.D.) should be orange.
>   5. Press and release the RESUME button again, the
> indicator (L.E.D.) should be green.
>   6. Release both buttons.
>   
>   step 2 : Software for Permanant
>   
>   1. Reconnect the printer cable.
>   2.Open General Tools software and select (USB
> PORT)
>   3 .Choose (SET DESTINATION 1) And it should be
> reset.
>   
>   Remark "After service mode Pls use software for
> permanent reset"
>   
>   ++++++++++
>   Canon i850, i950, S600
>   Start with the printer OFF
>   1. Hold down RESUME and then hold down POWER
>   2. release RESUME
>   3. press RESUME twice, then release POWER
>   4. Let green light blink until printer is done
> futzing
>   Select function with RESUME press POWER to
> execute:
>   presses - light color - function
>   Number of presses - light color - function
>   0 presses - green - Test print (or exit service
> mode on i960)
>   1 press - orange - EEPROM info print (plus grid
> nozzle diagnostic on i960)
>   2 presses - green - EEPROM initialize
>   3 presses - orange - Reset waste ink counter
>   ++++++++++
>   Canon S450 Printer
>   1: Power off printer
>   2: Hold Resume button then press and hold POWER,
> the beeper will sound once.
>   3: Hold POWER and release RESUME
>   4: Press RESUME twice
>   5. Release Power button
>   6: When the indicator lights steady, press RESUME
> three(3) times. The indicator should be orange.
>   7: Press Power to set data
>   
>   ++++++++++
>   Canon BJC 1000 Serie
>   1: Remove Cartridge
>   2: Unplug the AC Power Cord
>   3: Hold down the RESUME button
>   4: Release RESUME after plugging in the AC Power
> cord.
>   5: Press the RESUME once within 5 seconds and
> release the RESUME .
>   6: Press and HOLD RESUME for two seconds or more
> and release it.
>   7: Press and HOLD RESUME for two seconds or more
> and release it.
>   8: Unplug AC Power Cord to set data.
>   
>   ++++++++++
>   Canon BJC-2000 BJC-2100 Serie
>   1: Remove the Cartridge
>   2: Unplug the AC Power Cord
>   3: Close Front access panel
>   3: Hold down the RESUME/RESET button and plug in
> the AC power cord
>   4: Release RESUME/RESET after plugging in the AC
> Power cord.
>   5: Press the RESUME/RESET once within 5 seconds
> and release the RESUME/RESET .
>   6: Press and HOLD RESUME/RESET for two seconds or
> more and release it.
>   7: Press and HOLD RESUME/RESET for two seconds or
> more and release it.
>   8: Unplug AC Power Cord to set data.
>   
>   ++++++++++
>   
>   Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
>   Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550
> BJC-4650
>   Unplug Power Cord
>   Hold POWER and RESUME buttons
>   Plug in Power Cord
>   Release buttons
>   Open front door of printer
>   Hold the CARTRIDGE and RESUME buttons
>   Press POWER
>   Release all buttons after the beeps
>   Press CARTRIDGE once
>   Press RESUME
>   
>   ++++++++++
>   Canon BJC-5000
>   1: Power off printer
>   2: Press and hold RESUME then press POWER, The
> indicator will start blinking.
>   3: While the indicator is blinking , Press RESUME
> twice then Wait until the printer beeps to indicate
> service mode
>   5: When the indicator lights steady GREEN, press
> RESUME four(4)times. The indicator should be GREEN.
>   6: Press Power to set data
>   Service Test Print
>   1: Power off printer
>   2: Press and hold RESUME then press POWER, The
> indicator will start blinking.
>   3: While the indicator is blinking , Press RESUME
> twice then Wait until the printer beeps to indicate
> service mode
>   5: When the indicator lights steady GREEN, press
> RESUME two(2)times. The indicator should be GREEN.
>   6: Press Power to Print
>   Nozzle Print
>   1: Power off printer
>   2: Press and POWER, until the printer beeps and
> release.
>   Demonstration Print
>   1: While the printer in ON , , Press and hold
> RESUME until the printer plays a melody of beeps.
>   
>   ++++++++++
>   
>   Canon BJC-5100
>   Self Test
>   Switch Printer off. Hold Power for 1 beep.
>   
>   Waste Counter Reset
>   1: Power off printer
>   2: Press and hold RESUME then press POWER, The
> indicator will start blinking.
>   3: While the indicator is blinking , Press RESUME
> twice then Wait until the printer beeps to indicate
> service mode
>   5: When the indicator lights steady GREEN, press
> RESUME four(4)times. The indicator should be GREEN.
>   6: Press Power to set data
>   Service Test Print
>   1: Power off printer
>   2: Press and hold RESUME then press POWER, The
> indicator will start blinking.
>   3: While the indicator is blinking , Press RESUME
> twice then Wait until the printer beeps to indicate
> service mode
> 
=== message truncated ===


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Everything you need is one click away.  Make Yahoo! your home page now.
http://us.click.yahoo.com/AHchtC/4FxNAA/yQLSAA/vbOolB/TM
--------------------------------------------------------------------~-> 

Official Web Site : http://www.awari.or.id
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/asosiasi-warnet/

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



Kirim email ke