It depends on your pointcut.  Sorry, i should have spotted you were
using call and pointed this out.

> This is not intuitive to me because I thought that weaving meant that the 
> methods bytecode matching the pointcut would be modified by the weaving 
> process.  Actually, it seems to indicate that every place (that match the 
> include statement) where the method is called will be modified.

Yes that is what is happening.  If you use call() then wherever there
is a call to the method you specify, it will be woven.  This can be
many places.  If you use execution() then only the one place where the
method is defined is woven.

The reason for enabling you to weave 'either end' (so either the
callsite or the destination) is for situations where you don't have
weaving access to both ends.  Suppose you wan't to do something
whenever a method on a system class runs (e.g. List.add()).  You can't
usually use execution (and modify the add() method directly) because
you don't have weaving access to the library containing List.  In
these cases you modify the calls to List.add() instead.

*usually* when load time weaving you are fine to use execution().

cheers,
Andy

On 23 February 2012 10:30,  <marc.bre...@emc.com> wrote:
> OK, I think this is due to my misunderstanding about how aspectj weave 
> aspects.
> My own main method was not in test.services, but in a different package.
> If I include the package containing my Main class, then it works
>
> I understood that <include within="foo.*"/> actually meant that all the 
> method that match the pointcut in foo.* would be weaved.
> Actually, it means that only the callers (that call the method matching the 
> pointcut) should be in foo.*
>
> This is not intuitive to me because I thought that weaving meant that the 
> methods bytecode matching the pointcut would be modified by the weaving 
> process. Actually, it seems to indicate that every place (that match the 
> include statement) where the method is called will be modified.
>
> -----Original Message-----
> From: aspectj-users-boun...@eclipse.org 
> [mailto:aspectj-users-boun...@eclipse.org] On Behalf Of marc.bre...@emc.com
> Sent: jeudi 23 février 2012 18:45
> To: aspectj-users@eclipse.org
> Subject: Re: [aspectj-users] Load-time weaving issue
>
> Thanks for testing.
>
> I see the following line:
> [AppClassLoader@535ff48b] debug weaving 'test.services.SearchService2'
>
> But not this one:
> [AppClassLoader@535ff48b] weaveinfo Join point
>
> And I don't see the aspect output (Before search for:foo op:null)
>
> I'll try to compile the aspect and run it like you do. So far I compiled it 
> from Intellij IDEA, maybe there is some issue there.
>
> -----Original Message-----
> From: aspectj-users-boun...@eclipse.org 
> [mailto:aspectj-users-boun...@eclipse.org] On Behalf Of Andy Clement
> Sent: jeudi 23 février 2012 17:14
> To: aspectj-users@eclipse.org
> Subject: Re: [aspectj-users] Load-time weaving issue
>
> Hi,
>
> I took the code as-is and set it up to run ltw from the command line.
>
> The only change I made was adding a main method to the SearchService2
> class just so that I could 'run' something:
>
>    public static void main(String[] argv) {
>      new SearchService2().get("foo",null);
>    }
>
> I then ran it:
>
> java -javaagent:/Users/aclement/installs/aspectj170m1/lib/aspectjweaver.jar
> test.services.SearchService2
> [AppClassLoader@535ff48b] info AspectJ Weaver Version 1.7.0.M1 built
> on Friday Dec 16, 2011 at 16:56:09 GMT
> [AppClassLoader@535ff48b] info register classloader
> sun.misc.Launcher$AppClassLoader@535ff48b
> [AppClassLoader@535ff48b] info using configuration
> /Users/aclement/installs/aspectj170m1/marc/bin/META-INF/aop.xml
> [AppClassLoader@535ff48b] info register aspect test.services.LoggingAspect
> [AppClassLoader@535ff48b] debug weaving 'test.services.SearchService2'
> [AppClassLoader@535ff48b] weaveinfo Join point
> 'method-call(java.util.List
> test.services.SearchService2.get(java.lang.String,
> test.services.SearchService2$Operator))' in Type
> 'test.services.SearchService2' (SearchService2.java:18) advised by
> before advice from 'test.services.LoggingAspect'
> (LoggingAspect.java:4)
> [AppClassLoader@535ff48b] weaveinfo Join point
> 'method-call(java.util.List
> test.services.SearchService2.get(java.lang.String,
> test.services.SearchService2$Operator))' in Type
> 'test.services.SearchService2' (SearchService2.java:18) advised by
> after advice from 'test.services.LoggingAspect' (LoggingAspect.java:9)
> [AppClassLoader@535ff48b] debug weaving 'test.services.LoggingAspect'
> [AppClassLoader@535ff48b] info processing reweavable type
> test.services.LoggingAspect: test/services/LoggingAspect.java
> [AppClassLoader@535ff48b] debug cannot weave
> 'org.aspectj.lang.NoAspectBoundException'
> Before search for:foo op:null
> test.services.SearchService2.get 2
> After search for:foo op:null
>
> The advice was OK (this was with the include="test.services.*" line).
>  I changed the include line to:
>
> <include within="test.services.SearchService2"/>
>
> and that also worked.
>
> When you say it doesn't work, what do you see - do you see the aspect
> registration in the debug output, but just no weave infos for the
> SearchService2 class?  Can you run it successfully the same as I have
> run it?
>
> cheers,
> Andy
>
> On 23 February 2012 07:14,  <marc.bre...@emc.com> wrote:
>> Not much luck. The pointcut below work with
>>
>>         <include within="*"/>
>>
>> But not with
>>
>>         <include within="test.services.*"/>
>>
>>
>>
>>
>>
>> From: aspectj-users-boun...@eclipse.org
>> [mailto:aspectj-users-boun...@eclipse.org] On Behalf Of Pasturel
>> Sent: mercredi 22 février 2012 19:41
>> To: aspectj-users@eclipse.org
>> Subject: Re: [aspectj-users] Load-time weaving issue
>>
>>
>>
>>
>> have you tried with the pointcut definited as below ?
>>
>>    pointcut search(SearchService2 service, String terms,
>> SearchService2.Operator operator) :
>>
>>      call(*  *..SearchService2.get(String, SearchService2.Operator))
>>
>>                                                                 &&
>> target(service)
>>
>>                                                                 &&
>> args(terms, operator);
>>
>>
>> Le 22/02/2012 18:45, marc.bre...@emc.com a écrit :
>>
>> Hi,
>>
>> I try to use Load Time Weaving with a very simple program. It works except
>> when I try to restrict the weaving to a class or a package.
>>
>> There is probably something obvious I missed but I tried most of the debug
>> flags and it does not help.
>>
>> My example work with compile-time weaving.
>>
>>
>>
>> Aop.xml:
>>
>> <aspectj>
>>
>>
>>
>>     <aspects>
>>
>>         <aspect name="test.services.LoggingAspect"/>
>>
>>     </aspects>
>>
>>
>>
>>     <weaver options="-verbose -debug -showWeaveInfo">
>>
>>         <!--When I add this it does not work-->
>>
>>         <include within="test.services.*"/>
>>
>>         <!--<include within="test.services.SearchService2"/>   This does not
>> work either -->
>>
>>         <!--<include within="*"/>  This does work -->
>>
>>     </weaver>
>>
>> </aspectj>
>>
>>
>>
>> Aspect:
>>
>> package test.services;
>>
>> public aspect LoggingAspect {
>>
>>
>>
>>     before(SearchService2 service, String term, SearchService2.Operator
>> operator): search(service, term, operator) {
>>
>>         System.out.println("Before search for:" + term + " op:" + operator);
>>
>>         System.out.flush();
>>
>>     }
>>
>>
>>
>>     after(SearchService2 service, String term, SearchService2.Operator
>> operator): search(service, term, operator) {
>>
>>         System.out.println("After search for:" + term + " op:" + operator);
>>
>>         System.out.flush();
>>
>>     }
>>
>>
>>
>>      pointcut search(SearchService2 service, String terms,
>> SearchService2.Operator operator) :
>>
>>      call(* SearchService2.get(String, SearchService2.Operator))
>>
>>                                                                 &&
>> target(service)
>>
>>                                                                 &&
>> args(terms, operator);
>>
>>
>>
>> }
>>
>>
>>
>> Class to Weave:
>>
>> package test.services;
>>
>>
>>
>> import java.util.Arrays;
>>
>> import java.util.List;
>>
>>
>>
>> public class SearchService2 {
>>
>>
>>
>>     public enum Operator {
>>
>>         EQUALS,
>>
>>         CONTAINS
>>
>>     }
>>
>>     public List<String> get(String term, Operator operator) {
>>
>>         System.out.println("test.services.SearchService2.get 2");
>>
>>         return Arrays.asList(term + "1", term + "2");
>>
>>     }
>>
>> }
>>
>>
>>
>> Any help appreciated
>>
>> Best regards,
>>
>> Marc
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>>
>> aspectj-users mailing list
>>
>> aspectj-users@eclipse.org
>>
>> https://dev.eclipse.org/mailman/listinfo/aspectj-users
>>
>>
>>
>>
>> _______________________________________________
>> aspectj-users mailing list
>> aspectj-users@eclipse.org
>> https://dev.eclipse.org/mailman/listinfo/aspectj-users
>>
> _______________________________________________
> aspectj-users mailing list
> aspectj-users@eclipse.org
> https://dev.eclipse.org/mailman/listinfo/aspectj-users
>
> _______________________________________________
> aspectj-users mailing list
> aspectj-users@eclipse.org
> https://dev.eclipse.org/mailman/listinfo/aspectj-users
>
> _______________________________________________
> aspectj-users mailing list
> aspectj-users@eclipse.org
> https://dev.eclipse.org/mailman/listinfo/aspectj-users
_______________________________________________
aspectj-users mailing list
aspectj-users@eclipse.org
https://dev.eclipse.org/mailman/listinfo/aspectj-users

Reply via email to