Hi, Following my post about "Could not open connection to the host,on port 25: Connect failed" on Version 1.4.5, I loaded the latest version I have (1.4.5 RC13) and started testing.
All tests were conducted under zero load. The test is to repeatedly, manually telnet to ASSP on port 25 and then break the connection after receiving the ASSP HELO. Failure was recognized if I could not connect or if I lost a partial connection (connected, but no response from ASSP). It was rather easy to achieve failure within 5 or 6 attempts, sometimes only 3 or 4 attempts. As each version failed, I rolled back to the next most previous version that I had on hand. All of them failed until I got back to version 1.2.5 (2). Version 1.2.5 (2) does not break. I then set up a monitor connection. It still did not break. Versions tested include: 1.4.5 RC 8 and 11 1.4.3 1.4.1.1.47 1.4.1.1 1.3.8 1.3.3 1.3.0 1.2.5 (2) I am guessing here, but I think something changed in the flow that affected connection accept(); Michael Thomas Mathbox 978-687-3300 1-877-MATHBOX (Toll Free) ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Assp-test mailing list Assp-test@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/assp-test
