i had same problems with EICAR test. i don't know why but it was not detected when coming through assp. i tried with a real virus and assp+clamav detected it. here is my post on the forum: http://goo.gl/De93iQ
cheers. On Fri, Dec 6, 2013 at 11:29 AM, Pontus Hellgren < [email protected]> wrote: > Hi Again! > > Well as you can read from the script(avg.sh below), I get output in a log > file while running avg or clamd in filescanner mode. > And they tell me that all files they scan are [OK] no matter if the file > contains a virus or not... > So, when I send a mail with any form of eicar to ASSP the scanner scans the > file but say its [OK]. (which is wrong...) > Running the filescanner script(avg.sh below) from commandline gives output > [VIRUS] for any eicar tested, so then it works! > > I would love to know if there was a way to log all scans with > File::Scan::ClamAV in a special logfile or get debug info in the normal > logfiles to be able to track down where/why it goes wrong. > Ideeas how to, anyone? > > Regards, > Pontus > > -----Original Message----- > From: Colin Waring [mailto:[email protected]] > Sent: den 5 december 2013 15:42 > To: 'ASSP development mailing list' > Subject: Re: [Assp-test] Problems with clamav and filescanner. > > Have you any logs that show ASSP calling the virus scanner and what it > returns? > > Have you got AVG or clamscan configured to log what they do when they are > called? > > Those kind of logs will probably tell you what is going on and if there are > any obvious issues. > > -----Original Message----- > From: Pontus Hellgren [mailto:[email protected]] > Sent: 05 December 2013 13:29 > To: 'ASSP development mailing list' > Subject: Re: [Assp-test] Problems with clamav and filescanner. > > Hi again! > > As stated in the mail, filescan mode was only used to verify that/or not > clamscan or any other commandline scanner had the same failing result. (as > was the case) I am using File::Scan::ClamAV but since it does not report > any > viruses anymore I had to test different ways to establish if/or not clamAV > was a problem. (seems not to be) > > I will compare your install below to mine and see if there is anything that > differs(at a glance, not much!) Thanks for fast reply. > I'll be back! > > Regards, > Pontus > > -----Original Message----- > From: Colin Waring [mailto:[email protected]] > Sent: den 5 december 2013 13:55 > To: 'ASSP development mailing list' > Subject: Re: [Assp-test] Problems with clamav and filescanner. > > Any reason you're using filescan for clam? > > This is an extract from my server build document for Ubuntu 12.04 LTS - > note > that a couple of Perl modules fail to build when using the ASSP > mod_inst.pl > so you have to get them installed manually. Below assumes you are starting > with a completely fresh perl install so does some config you may not need. > Also verify with the clamav-unofficial-sigs project that 3.7.2 has not been > replaced by a newer version and remember to check for updates occasionally. > > apt-get install rsync clamav clamd clamav-daemon #For some reason I have > clamd and -daemon, I think one is deprecated but you would need to check > that perl -MCPAN -e shell install Bundle::LWP install YAML o conf init > connect_to_internet_ok urllist o conf init urllist o conf urllist push > http://mirror.bytemark.co.uk/CPAN/ > o conf urllist push http://mirror.ox.ac.uk/sites/www.cpan.org/ > o conf commit > install CPAN > reload cpan > install File::Scan::ClamAV > cd /root > wget > > http://downloads.sourceforge.net/project/unofficial-sigs/clamav-unofficial-s > > igs-3.7.2.tar.gz?r=http%3A%2F%2Fsourceforge.net%2Fprojects%2Funofficial-sigs > %2F&ts=1382875090&use_mirror=heanet > tar -xzvf clamav-unofficial-sigs-3.7.2.tar.gz > cd clamav-unofficial-sigs-3.7.2 > > You'll then need to put the script in a permenant location, set up the > conf, > logrotate and cron files where they should be and you'll get a lot of handy > extra definitions > > Back in ASSP, simply check UseAvClamd. Make sure the other clam settings > are > ok and consider using the ASSP_AFC plugin. > > I've never touched filescan settings and the stats report plenty of viruses > detected. > > All the best, > Colin Waring. > > -----Original Message----- > From: Pontus Hellgren [mailto:[email protected]] > Sent: 05 December 2013 11:14 > To: 'ASSP development mailing list' > Subject: [Assp-test] Problems with clamav and filescanner. > > Hi There! > > I run ASSP version 2.3.4(13335) on Ubuntu 12,4 LTS and have installed clamd > for antivirus scanning. > For some reason it does not catch anything running it with ASSP. > If I run tests with eicar.com (txt, zip, 2xzip) files via commadline > (clamscan) picks it out, but if I mail them by ASSP there is no catch. > So, I installed AVG commandline scanner and made a script to use it as a > filescanner and ran some testruns, no catch via filescan in ASSP. > (logs say files where OK but they should not have been) Running the AVG > commadline scanner by hand worked every time, but not in ASSP. > So, I rewrote the script to use clamscan as a filescanner, made same tests, > still no catch. > > Somehow, I belive, ASSP write the .eml files, in the virusscan directory, > in a fashion(I don't kon how), so it makes clamd, clamscan/filescanners > unable to catch the eicar.com(txt, zip, 2xzip) and then probably all other > viruses. > > Here is the script I used for filescanning in ASSP: > #!/bin/bash > # Filename: avg.sh > # Createor: Pontus Hellgren 20131201 > # Use: Script using avgscan for filescanning in ASSP > > logfile=/var/log/assp-avg.log # Set a logfile > > if [ -z "$1" ] # Check for input filename then echo "OK" # NO filename > input, no need to confuse ASSP echo "No file to scan, sending [OK]" >> > $logfile # Log it to logfile exit # No need to continue fi > > scanfilename=$1 # Set filename to scan > > if [ -f "$scanfilename" ] # If file exist do scan then result=`avgscan -a > $scanfilename >/dev/null 2>&1; echo $?` # Scan with AVG and save result, > discard other output if [ $result -eq 0 ] # If 0 then no virus found, > reply > OK else reply VIRUS then echo "OK" > echo "$scanfilename [OK]" >> $logfile # Log ok to logfile echo >> $logfile > elif [[ $result -eq 4 || $result -eq 5 ]] # If 4 or 5, Virus or potentially > unwanted program detected then echo "VIRUS" > echo "$scanfilename [VIRUS]" >> $logfile # Log virus to logfile echo >> > $logfile else echo "OK" # Return of any other number equals to us an error, > don't confuse ASSP echo "$scanfilename [ERROR]" >> $logfile # Log error to > logfile echo >> $logfile fi fi > > In ASSP I set the following: > FileScanDir: /usr/share/assp/virusscan/ > FileScanCMD: /usr/share/assp/virusscan/avg.sh FILENAME FileScanBad:VIRUS > FileScanGood:OK > FileScanRespRe: > > Any ideeas to what goes wrong? > > To use script for clamscan, change "avgscan -a" to "clamscan", change the > ELIF to only 1 for VIRUS. > Clamscan only reports 2 for any error else but OK or VIRUS. > > Regards, > Pontus > > > > > > > ---------------------------------------------------------------------------- > -- > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Assp-test mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-test > > > > ---------------------------------------------------------------------------- > -- > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Assp-test mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-test > > > > > ---------------------------------------------------------------------------- > -- > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Assp-test mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-test > > > > ---------------------------------------------------------------------------- > -- > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Assp-test mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-test > > > > > ------------------------------------------------------------------------------ > Sponsored by Intel(R) XDK > Develop, test and display web and hybrid apps with a single code base. > Download it for free now! > > http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk > _______________________________________________ > Assp-test mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/assp-test > -- "Madness, like small fish, runs in hosts, in vast numbers of instances." Nessuno mi pettina bene come il vento. ------------------------------------------------------------------------------ Sponsored by Intel(R) XDK Develop, test and display web and hybrid apps with a single code base. Download it for free now! http://pubads.g.doubleclick.net/gampad/clk?id=111408631&iu=/4140/ostg.clktrk _______________________________________________ Assp-test mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-test
