- check all the setting for the lists and hashes to be set to 'DB:' (using mysql) - check that the mysql server is working correctly (if not assp will failover to plain files) - check all settings related to the rebuildspamdb - shutdown assp - clear the folder 'tmpDB' - remove all 'griplist....' related files from assp root folder - check the file time of the assp.cfg (written at assp shutdown) - check that the last line in assp.cfg is 'ConfigSavedOK:=1'
- start assp at commandline - wait 10 minutes , watch the log for normal maintenance - stop assp - start it as service - wait 10 minutes - start a rebuildspamdb task from the GUI or cmdqueue (in doubt enable the debugging for the rebuild) - wait until this task is finished - stop assp - start assp from commandline - everythng should work like expected - stop assp - start the service Thomas Von: "K Post" <nntp.p...@gmail.com> An: "ASSP development mailing list" <assp-test@lists.sourceforge.net> Datum: 29.09.2021 16:41 Betreff: [Assp-test] Rebuild SpamDB worker thread at startup hangs If I restart my server or just the ASSP windows service, I've discovered that ASSP generally will no longer fully start automatically as a service. I'm sure there's something misconfigured, corrupt, or broken on my machine. If the Windows server crashes or does an after hours update restart, ASSP needs to be started from the command line before it'll run as a service, which presents a big problem. The service does always run, but I cannot connect to the GUI nor to SMTP. At start, it uses about 10% of processor as expected. In task manager, I see memory usage go ~300mb, ~600mb, then up to 984mb and stop. CPU then goes down to 0.0% or 0.1% and it just hangs. In testing, I've left it for over an hour like this. It just sits. No SMTP, no GUI. RAM usage stays at 984mb. Nothing in maillog, nothing in the Windows system log that I can find. If I start from command line, ASSP will work, but there is a delay on the: starting rebuild SpamDB worker thread line, memory sits at 984mb, then after a two minutes or so, memory grows a bit more, I'll get the [OK] on the starting rebuild SpamDB line, and SMTP and the GUI start to work. It'll run like this quite happily forever. I want it running as a service though, so I'll ctrl+c, then start ASSP from the services manager. Task manager will show it again pausing at 984mb, but this time, it always continues and operates normally! So the temporary fix is to start on command line, ctrl+c, then start the service normally. Everything is up to date, including all modules. I'm using MySQL. useDB4Rebuild is checked RebuildEsesFileModel is unchecked, though I did try this when it first became an option. I turned it off because it used so much RAM and my rebuild is already under 45 minutes. Could there be something lingering because of this? Can you suggest anything that I should be checking? Is there something that starting ASSP from command line could be clearing out or resolving that starting it as a service wouldn't? Is there a debug switch that would capture what's happening at this very early stage of startup? There doesn't seem to be anything written to the logs at all. I'm making do as is, but sure would like to fix this issue. Thank you. _______________________________________________ Assp-test mailing list Assp-test@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/assp-test DISCLAIMER: ******************************************************* This email and any files transmitted with it may be confidential, legally privileged and protected in law and are intended solely for the use of the individual to whom it is addressed. This email was multiple times scanned for viruses. There should be no known virus in this email! *******************************************************
_______________________________________________ Assp-test mailing list Assp-test@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/assp-test
