I'm still having trouble understanding how to set up ASSP with Groupwise properly. Below is the configuration I have. I'm guessing someone will see the problem from there. What I'm experiencing is that incoming mail goes through ASSP and to Groupwise fine. Outgoing mail returns an error in Groupwise of "Send Failure: 530 Relaying not allowed".
We have two machines, a firewall (SuSE Enterprise 9) and a Netware 6.5 server (running Groupwise 7). The firewall server is the router for ALL Internet traffic. ASSP has been placed on the firewall machine. The firewall machine uses the following network configuration in routing. 192.168.1.3 -> Internal network 10.1.1.2 -> External network (to simple dlink modem/router - considered as WAN) The Netware server uses the IP address 192.168.1.1 The ASSP configuration I've done is the following: ASSP Primary listening: 10.1.1.2:25 ASSP Primary destination: 192.168.1.1:25 ASSP Secondary listening: 192.168.1.3:25 ASSP Secondary destination: 127.0.0.1:25 Groupwise GWIA config: Relay host is set to: 192.168.1.3 I'm new to all this so I'm sure it is something simple. Thanks, Seth >>> "Daniel Griswold" <[EMAIL PROTECTED]> 5/07/2007 10:34 am >>> Seth, I have two sites using ASSP and Groupwise 7. I have not had any issues on Linux. NetWare and Windows will both run perl, so assp will nun. I do know that ASSP will not demonize on NetWare and will need to be added to the AUTOEXEC.NCF. (perl SYS:\ASSP\assp.pl). I have not had any luck getting the web interface to work on NetWare, and have been forced to configure via config files. First, you will need to edit /etc/services and change the port entry for SMTP to something other than 25 (like 225) This will cause GWIA to bind to port 25 on all IP addresses. I then edited the GWIA properties (either using C1 or gwia.cfg) to lock the binding to just the interface IP. You could bind it to localhost, but telneting to the port helps in troubleshooting. Set ASSP to listen to incoming connections on the interface IP port 25 and pass to interface IP port 225. ASSP outbound is listening on localhost:25. GWIA's outbound mailhost setting does not support the addition of the port, only the IP/DNS address. I entered 127.0.0.1 as my outbound relay host. Again, this can be done in ConsoleOne or your gwia.cfg this is how an `lsof -i -n -p` should look on linux. perl 22637 nobody 2u IPv4 6167537 TCP 192.168.0.3:25 (LISTEN) perl 22637 nobody 3u IPv4 6167538 TCP *:55555 (LISTEN) perl 22637 nobody 4u IPv4 6167539 TCP 127.0.0.1:25 (LISTEN) gwia 22887 gwrun 8u IPv4 6168239 TCP 192.168.0.3:225 (LISTEN) gwia 22887 gwrun 9u IPv4 6168246 TCP 192.168.0.3:110 (LISTEN) gwia 22887 gwrun 10u IPv4 6168244 UDP 192.168.0.3:110 gwia 22887 gwrun 11u IPv4 6168245 UDP *:1564 gwia 22887 gwrun 12u IPv4 6168249 TCP 192.168.0.3:9850 (LISTEN) Daniel Griswold, CNE Owner / Consulant Griswold Computing www.griswoldcomputing.com >>> "Seth Mayo" <[EMAIL PROTECTED]> 07/04/07 6:54 PM >>> Has anyone on this list used Groupwise with ASSP? Which setting would I have to change to get Groupwise to communicate with ASSP instead of directly with the Internet for outgoing mail? Thanks, Seth ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user ------------------------------------------------------------------------- This SF.net email is sponsored by DB2 Express Download DB2 Express C - the FREE version of DB2 express and take control of your XML. No limits. Just data. Click to get it now. http://sourceforge.net/powerbar/db2/ _______________________________________________ Assp-user mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/assp-user
