>----- Original Message -----
>From: [EMAIL PROTECTED] on behalf of Henry Coleman [VoIP-PBX.ca] <[EMAIL PROTECTED]>
>Sent: Mon, 5/15/2006 4:54pm
>To: Commercial and Business-Oriented Asterisk Discussion
>Subject: Re: [asterisk-biz] [OT] GXP-2000 handset audio issue
>
>Hi Robert, The handset jack may be the problem.
>If you are close to another extension ..wiggle the cord or the plug until the problem re-appears (use a >softphone if you don't have a real phone)
>From the outside check that the contacts are clean, if they are then open up the phone and resolder the jack >connections on the board.
>(Use a very small soldering iron )
>I would check the network connectors at the same time as the cable puts a strain on the connector(s)
>Don't give up! ......9 times out of ten it's just a bad solder connection.
>but it may take some detective work to track it down
>Good luck and when you get it working upgrade the firmware(its much better)
>Henry
Henry,
Thanks for the idea... This issue certainly seems like it is related to some type of detection circuit and not a hard fault such as a bad solder connection. When getting the hanset to work via unplugging and plugging the handset cord I am doing that at the handset and not the phone. So that rules out the issue being at the phone. And with the fact I ahve tried a different handset and cord, I am ruling those out also. So it must be something in the audio circuitry somewhere. And with the crazy things I have heard about the way the phone is designed in regards to the handset and headset setup, it would not surprise me.
Robert
_______________________________________________ --Bandwidth and Colocation provided by Easynews.com --
asterisk-biz mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-biz
