Its set to 'no', how about yours?
Brian From: asterisk-biz-boun...@lists.digium.com [mailto:asterisk-biz-boun...@lists.digium.com] On Behalf Of li...@contacttel.com Sent: Sunday, October 11, 2009 6:11 PM To: 'Commercial and Business-Oriented Asterisk Discussion' Subject: Re: [asterisk-biz] Successful Switchvox Deployment "intercom paging via phones does not work properly with Switchvox/Linksys phones, puts existing calls on hold and seems to be the cause an issue that requires a PBX reboot the next day" Got same problem here... is your send audio to speaker set to yes or no ? From: asterisk-biz-boun...@lists.digium.com [mailto:asterisk-biz-boun...@lists.digium.com] On Behalf Of Brian Franklin Sent: October-11-09 6:47 PM To: Commercial and Business-Oriented Asterisk Discussion Subject: [asterisk-biz] Successful Switchvox Deployment I just wanted to share the details for a recent successful VoIP deployment: Project: Replace Mitel SX-200 TDM/VoIP hybrid PBX for 90 user environment. Integrate with existing Fax server, PA system, credit card and adhoc fax machines Solution: 1 Adtran Atlas 550 - allows existing PRI's to be shared between PBX and Fax server 2 Adtran 1238 48 port PoE switches - so far, this is a great switch 1 Switchvox SMB server - largest appliance available 4 Cisco SPA509G - call center users 20 Cisco SPA525G - senior management 65+ Cisco SPA942 - general users 1 Grandstream FXS gateway - credit card and adhoc fax machines 1 TFTP server - free Solarwinds TFTP server running on existing windows server 1 Cyberdata VoIP paging gateway - connects VoIP to existing paging system Lessons Learned - Grandstream is not ready for primetime, requires regular reboots, will be replacing it with an Audiocodes 24 FXS gateway ASAP - Cisco SAP525G has all the bell and whistles, but are unreliable, 3 have failed in the first week, also required me to disable ALAW and ULAW to fix buzzing sound, will probably replace with SPA962 - Intercom paging via phones does not work properly with Switchvox/Linksys phones, puts existing calls on hold and seems to be the cause an issue that requires a PBX reboot the next day - Updated Cyberdata with wrong firmware (my mistake), unit would not reboot and requires it to be re-flashed by manufacturer (poor design), I had a new one shipped and left the firmware alone - Linksys phones uses individual config files for each phone, this is a problem when you have 90 phones and need to make a change to all phones, found a nice little utility that can find/replace text within multiple files, this was a huge time saver Hope this helps and/or encourages someone J Brian Franklin www.ntginc.net
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- AstriCon 2009 - October 13 - 15 Phoenix, Arizona Register Now: http://www.astricon.net asterisk-biz mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-biz
