Yes I have seen it and Kim Culhan also has this problem. There was no real solution to this one. Only some suggestions by Kim that I had no time to follow so I don't know if the suggestions work or not.
You can check this thread in the archives: http://lists.digium.com/pipermail/asterisk-bsd/2005-May/000893.html -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Staffan Ulfberg Sent: Wednesday, June 01, 2005 7:57 PM To: [email protected] Subject: [Asterisk-bsd] zaptel problem with TDM11B Hello, Sometimes (maybe once a week), my zaptel (TDM11B, i.e., TDM400P with one FXS and one FXO module) driver (the lastest svn version of wcfxs from the zaptel-bsd repository) "hangs": My analog phone connected to the fxs interface does not work anymore. The fxo interface is not used at all, and is not even configured in zaptel.conf. When this happens, a lot of information is repeatedly logged in my syslog (and dmesg) -- about once a second the following is output: Jun 2 01:45:37 multivac kernel: Ouch, part reset, quickly restoring reality (0) Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_0_PEAK iREG 0 = 0 should be 55c2 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_1_PEAK iREG 1 = 0 should be 51e6 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW2_PEAK iREG 2 = 0 should be 4 b85 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW3_PEAK iREG 3 = 0 should be 4 937 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_COL1_PEAK iREG 4 = 0 should be 3 333 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_FWD_TWIST iREG 5 = 0 should be 2 02 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_RVS_TWIST iREG 6 = ff37 should b e 202 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_RATIO_TRES iREG 7 = 0 should be 198 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_COL_RATIO_TRES iREG 8 = 0 should be 198 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_ROW_2ND_ARM iREG 9 = 2 should be 611 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_COL_2ND_ARM iREG a = 0 should be 202 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_PWR_MIN_TRES iREG b = 0 should b e e5 Jun 2 01:45:37 multivac kernel: !!!!!!! DTMF_OT_LIM_TRES iREG c = 2 should be a1c Jun 2 01:45:37 multivac kernel: !!!!!!! OSC1_COEF iREG d = 0 should be 7b30 Jun 2 01:45:37 multivac kernel: !!!!!!! OSC1X iREG e = 0 should be 63 Jun 2 01:45:37 multivac kernel: !!!!!!! OSC1Y iREG f = 1c should be 0 Jun 2 01:45:37 multivac kernel: !!!!!!! OSC2_COEF iREG 10 = 0 should be 7870 Jun 2 01:45:37 multivac kernel: !!!!!!! OSC2X iREG 11 = 0 should be 7d Jun 2 01:45:37 multivac kernel: !!!!!!! OSC2Y iREG 12 = 70 should be 0 Jun 2 01:45:37 multivac kernel: !!!!!!! RING_OSC iREG 14 = 0 should be 7ef0 Jun 2 01:45:37 multivac kernel: !!!!!!! RING_X iREG 15 = 0 should be 160 Jun 2 01:45:37 multivac kernel: !!!!!!! PULSE_ENVEL iREG 17 = 0 should be 200 0 Jun 2 01:45:37 multivac kernel: !!!!!!! PULSE_X iREG 18 = 0 should be 2000 Jun 2 01:45:37 multivac kernel: !!!!!!! RECV_DIGITAL_GAIN iREG 1a = 0 should be 2000 Jun 2 01:45:37 multivac kernel: !!!!!!! XMIT_DIGITAL_GAIN iREG 1b = 0 should be 4000 Jun 2 01:45:37 multivac kernel: !!!!!!! LOOP_CLOSE_TRES iREG 1c = 0 should be 1000 Jun 2 01:45:37 multivac kernel: !!!!!!! RING_TRIP_TRES iREG 1d = 0 should be 3600 Jun 2 01:45:37 multivac kernel: !!!!!!! COMMON_MIN_TRES iREG 1e = 0 should be 1000 Jun 2 01:45:37 multivac kernel: !!!!!!! COMMON_MAX_TRES iREG 1f = 0 should be 200 Jun 2 01:45:37 multivac kernel: !!!!!!! PWR_ALARM_Q1Q2 iREG 20 = 0 should be 7c0 Jun 2 01:45:37 multivac kernel: !!!!!!! PWR_ALARM_Q3Q4 iREG 21 = 0 should be 2600 Jun 2 01:45:37 multivac kernel: !!!!!!! PWR_ALARM_Q5Q6 iREG 22 = 0 should be 1b80 Jun 2 01:45:37 multivac kernel: !!!!!!! LOOP_CLOSURE_FILTER iREG 23 = 0 shoul d be 8000 Jun 2 01:45:37 multivac kernel: !!!!!!! RING_TRIP_FILTER iREG 24 = 80 should be 320 Jun 2 01:45:37 multivac kernel: !!!!!!! TERM_LP_POLE_Q1Q2 iREG 25 = 0 should be 8c Jun 2 01:45:37 multivac kernel: !!!!!!! TERM_LP_POLE_Q3Q4 iREG 26 = 0 should be 100 Jun 2 01:45:37 multivac kernel: !!!!!!! TERM_LP_POLE_Q5Q6 iREG 27 = 8c should be 10 Jun 2 01:45:37 multivac kernel: !!!!!!! CM_BIAS_RINGING iREG 28 = 0 should be c00 Jun 2 01:45:37 multivac kernel: !!!!!!! DCDC_MIN_V iREG 29 = 0 should be c00 Jun 2 01:45:37 multivac kernel: !!!!!!! DCDC_XTRA iREG 2a = 0 should be 1000 Jun 2 01:45:37 multivac kernel: !!!!!!! LOOP_CLOSE_TRES_LOW iREG 2b = 0 shoul d be 1000 Jun 2 01:45:37 multivac kernel: !!!!! Init Indirect Registers UNSUCCESSFULLY. Jun 2 01:45:37 multivac kernel: Indirect Registers failed verification. When this happens, I can unload the kernel module, and reload it, and operation resumes to normal. I've seen this since I started using Asterisk a few months ago. Has anyone else seen the problem? Staffan _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
