Are this card V1 or V2? V2 cards aren't supported now by zaptel-fbsd drivers.
----- Original Message ----- From: "Richard E. Neese" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; "Asterisk on BSD discussion" <[email protected]> Sent: Thursday, July 21, 2005 4:39 PM Subject: Re: [Asterisk-bsd] Zaptel TE405P/FreeBSD Problem > did you make sure the card is not sharing a irq ? > > On July 21, 2005 02:35 pm, Armand Sulter wrote: > > We just installed a TE405P, the lights on the > > card go in 'knight rider' mode as expected, the > > bios detects the card as 'Simple Comm' device and > > assigns it an IRQ, however Freebsd does not pick > > it up at all. > > > > - 'dmesg' shows no signs of the card at all, not even the > > irq the bios had assigned to the card. > > - We've tried a different machine with no luck. > > - The card seems to work fine under Linux(centos) > > > > System Specs : > > > > - SuperMicro X5DPA-TGM+ Dual Xeon Motherboard > > - FreeBSD 5.4 (smp) (Tried it without smb as well) > > - Zaptel zaptel-0.10 Drivers > > > > > > Does anyone have any ideas on this ? > > > > Armand, > > > > Armand at Armie dot Net > > _______________________________________________ > > Asterisk-BSD mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-bsd > > -- > Open your eyes to life and look at all > the wounderfulcolors the Gods gave us. > > _______________________________________________ > Asterisk-BSD mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-bsd > _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
