What Rev is the TDM400P? I was able to get my Rev. H to work under FreeBSD this week. While it did not work out of the box, I had to port some code from the linux version of Zaptel. If you still looking for a BSD solution, you may want to try FreeBSD.
PB -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Taylor Sent: Friday, August 05, 2005 1:19 AM To: Asterisk on BSD discussion Subject: [Asterisk-bsd] NetBSD & zaptel hi, i am trying to get my Digium TDM400P (with 2x FXS and 2x FXO) to work on my new NetBSD machine. have managed to get the zaptel-netbsd-20050404.tar.bz2 sources to compile in both lkm and kernel mode. my problem is that all calls to wcfxs_getreg() seem to return 0 and the FXO&FXS cards are not detected... i.e. i get ProSLIC on module 0, product 0, version 0 Module 0: Not installed anyone had any luck getting this card to work on NetBSD? got any ideas where to look? i can do the coding, but have run out of ideas to debug the thing and have not found anything differing with the linux drivers.... just a little background on what i have tried so far 1) the card works on an old Pentium III running Debian 3.0 2) the card works on the New machine (same one i am trying NetBSD on) running Debian 3.1 (linux 2.6.8, zaptel-1.0.9) 3) in NetBSD the card is recognised (see attached dmesg.txt) 4) wfxs_getcreg() calls seem to work (see attached getcreg.txt) and match with debug output i have made on the Linux machine. so... it is in the __write_8bits() and __read_8bits() that things are not working as expected.... one last thing, my system is... $ uname -a NetBSD gawain.omniscient.local 2.0_STABLE NetBSD 2.0_STABLE (ZAPTEL) #3: Fri Aug 5 15:00:12 EST 2005 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/ZAPTEL i386 hope to hear from you michael taylor. _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
