I experience crashes when using the zaptel driver under 6.x as well.
Please note that I am using some sort of knock off card, it's not an
official Digium card. I rebuilt the zaptel port just before booting into
single user mode and running this.
Thanks,
Brad
FreeBSD uno 6.0-BETA5 FreeBSD 6.0-BETA5 #0: Fri Sep 23 01:26:42 PDT 2005
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/UNO i386
# zttest
Opened pseudo zap interface, measuring accuracy...
99.987793% 99.987793% 99.987793%
100.000000% 99.987793% 99.987793% 99.987793%
99.987793% 99.987793% 99.987793% 99.987793% 99.987793% ^C
r 12 passes ---e
Fatal trap 12: page fault while in kernel mode
fault virtual address = 0x10
fault code = supervisor read, page not present
instruction pointer = 0x20:0xc04e9633
stack pointer = 0x28:0xde3a7b5c
frame pointer = 0x28:0xde3a7bcc
code segment = base 0x0, limit 0xfffff, type 0x1b
= DPL 0, pres 1, def32 1, gran 1
processor eflags = interrupt enabled, resume, IOPL = 0
current process = 75 (zttest)
trap number = 12
panic: page fault
Uptime: 2m54s
Cannot dump. No dump device defined.
> Richard Neese wrote:
>
>>On October 3, 2005 05:34 pm, Alexander Timoshenko wrote:
>>try running ztcfg it segfaultsthe system
>>
>>
>>
> uname -a?
>
>>
>>
>>
>>> Current trunk should be compatible with FreeBSD 6.X. I've tested it
>>>a bit with
>>>TDM410P and got no major problems. I'm going to test more this week but
>>>any feedback is welcome.
>>>
>>>
>>
>>
>>
>
> _______________________________________________
> Asterisk-BSD mailing list
> [email protected]
> http://lists.digium.com/mailman/listinfo/asterisk-bsd
>
_______________________________________________
Asterisk-BSD mailing list
[email protected]
http://lists.digium.com/mailman/listinfo/asterisk-bsd
