Hello. Im new to PBX's and to the asterisk world, and i broth a X100p clone hardware. After trying the misc/zaptel driver on FreeBSD 6.0 (beta3) and notice it will segfault, ive try the trunk of SVN.
But ive not come too far... I have not even install asterisk. Want to make me sure the driver does work on the hardware... here is what i have done: 1.- Load drivers. wcfxo0: <Wildcard X101P> port 0xec00-0xecff mem 0xdffff000-0xdfffffff irq 17 at device 6.0 on pci0 ZapTel Attach for wcfxo0: deviceID : 0xe159 wcfxo0: [GIANT-LOCKED] wcfxo: DAA mode is 'FCC' Found a Wildcard FXO: Wildcard X101P ZapTel device loaded. 2.- /usr/local/etc/zaptel.conf: loadzone=us defaultzone=us fxsks=1 3.- ztcfg -vvv shows this: [EMAIL PROTECTED] ./ztcfg -vvv Keyword: [loadzone], Value: [us] Keyword: [defaultzone], Value: [us] Keyword: [fxsks], Value: [1] Zaptel Configuration ====================== Channel map: Channel 01: FXS Kewlstart (Default) (Slaves: 01) 1 channels configured. 4.- [EMAIL PROTECTED] ./fxo_test on ioctl(ZT_SPECIFY): Device not configured [EMAIL PROTECTED] ./fxo_test dial 911 ioctl(ZT_SPECIFY): Device not configured whats ZT_SPECIFY? what am i missing? thanks in advance! -- __________________ Phillip Neumann [EMAIL PROTECTED] _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
