Hi, I have just uploaded another pre-release of my ISDN+USB driver, for FreeBSD 5/6/7. It should be very easy to install.
Here are some of the changes: - This time I have fixed and tested the Fritz driver, but only "Fritz PnP/PCI version 1", "AVM A1" and "AVM Fritz!Card (ISA)", is supported. I have also made some improvements to NT-mode. Primary rate, E1, has also got some fixes. Also I have fixed some compilation issues with the latest FreeBSD 6.0 release. - There is a new utility called "isdnconfig" that can be used to configure the mode of the D-channel. - There is a NetBSD 2.x port of this driver available. See the driver info file for more information. My driver now works well with Asterisk, using the "chan_capi" module. Just recently I made the following setup: Wireless ISDN phone <-> crossover cable <-> HFC-S USB <-> chan_capi <-> Asterisk <-> PPP <-> Winbond USB TA <-> internet <-> SIP-provider And it worked pretty well. Around 33kbit/s was used by the audio stream, though it is worth to mention that the sound degraded quickly when I started downloading things from the internet. Most likely the problem was that my ISP did not give priority to the UDP frames carrying the sound. Using a 128K internet connection might improve the situation. I have put some example configuration files at: http://home.c2i.net/hselasky/isdn4bsd/privat/temporary/asterisk/ Here is a document that describes some of the supported features: http://home.c2i.net/hselasky/isdn4bsd/privat/temporary/driver_info_6.txt Download the three files below into a new directory and type "make install". To uninstall type "make deinstall". http://home.c2i.net/hselasky/isdn4bsd/privat/temporary/155/Makefile http://home.c2i.net/hselasky/isdn4bsd/privat/temporary/new_ihfc_1_5_5.tar.bz2 http://home.c2i.net/hselasky/isdn4bsd/privat/temporary/new_ihfc_1_5_5.diff.bz2 Type "make help" for more help. --HPS _______________________________________________ Asterisk-BSD mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-bsd
