> From: [EMAIL PROTECTED] [mailto:asterisk-bsd- > [EMAIL PROTECTED] On Behalf Of Richard Neese > Sent: Monday, July 14, 2008 10:47 PM > To: Asterisk on BSD discussion > Subject: Re: [Asterisk-bsd] Yeastar TDM800 drivers on FreeBSD > > On Monday 14 July 2008 15:19:53 Shakir Solomon wrote: > > Hi > > > > I've recently acquired Yeastar TDM800 with an FXO and FXS module > > and installed asterisk-1.4.20.1 and zaptel-bsd-1.4.6 from the ports > > collection. > > > > I am running FreeBSD 7.0-STABLE. > > > > After rebooting the output of demsg is: > > > > dmesg: Zapata Telephony Interface Registered on major 196 > > dmesg: Echo Canceller: MG2 > > > > Apparently the Yeaster TDM800 does not work out of the box with the > > current Zaptel sources. On Yeaster's website they have provided a > > linux patch file for the Zaptel source. > > > > I assume a lot of pain was taken into making zaptel-bsd-1.4.6 as bsd > > friendly as possible and thought to manually patch the TDM800 drivers > > in there according to this "linux specific" documentation > > http://www.yeastar.com/download/TDM800DriverInstall.pdf > > > > However, that didn't work out too well, as the files from zaptel-bsd > > is way too different to the source. > > > > Has anyone been able to do this before? and is it possible to compile > > zaptel from source without any hiccups? > > > > Regards > > Shakir > > did you edit the /u/l/e/zaptel.conf and setup the interfaces ? > > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > Asterisk-BSD mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-bsd
I have this is my /usr/local/etc/zaptel.conf # we have one O2 module at position 2 and one S2 module at position 3. fxoks=3 fxoks=4 fxsks=5 fxsks=6 loadzone = us defaultzone = us This is the output of ztcfg: [EMAIL PROTECTED] /usr/local/etc]# ztcfg Keyword: [fxoks], Value: [3] Keyword: [fxoks], Value: [4] Keyword: [fxsks], Value: [5] Keyword: [fxsks], Value: [6] Keyword: [loadzone], Value: [us] Keyword: [defaultzone], Value: [us] ZT_CHANCONFIG failed on channel 3: Device not configured (6) This is the output of kldstat: [EMAIL PROTECTED] /usr/local/etc]# kldstat Id Refs Address Size Name 1 15 0xc0400000 907110 kernel 2 1 0xc0d08000 6a618 acpi.ko 3 1 0xc4529000 3000 pflog.ko 4 1 0xc4536000 33000 pf.ko 5 9 0xc45bd000 34000 zaptel.ko 6 1 0xc4617000 7000 qozap.ko 7 1 0xc461f000 22000 tau32pci.ko 8 1 0xc4644000 6000 wcfxo.ko 9 1 0xc464a000 b000 wcfxs.ko 10 1 0xc4675000 7000 wct1xxp.ko 11 1 0xc467c000 c000 wct4xxp.ko 12 1 0xc4698000 a000 wcte11xp.ko 13 1 0xc46a3000 e000 wcte12xp.ko I pretty sure I have to hack zaptel-bsd to include support for the Yeastar TDM800, it seems they have provided the linux for module at http://www.yeastar.com/download/zaptel-1.4.6/ystdm8xx.c _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- Asterisk-BSD mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-bsd
