I am configuring an Asterisk in FreeBSD 6.4, but I have a TE122 card from
Digium, I have two errors,
1 the plate is not rising:
[r...@voip /usr/ports]# pciconf -lv
no...@pci3:2:0: class=0x020000 card=0x8001d161 chip=0x8001d161 rev=0x11
hdr=0x00
vendor = 'Digium, Inc'
class = network
subclass = ethernet
2 is the-vv command ztcfg to configure the channels, the following error
occurs:
[r...@voip /usr/ports]# ztcfg -vv
Zaptel Version: zaptel-bsd-ng v0.0.1
Echo Canceller: MG2
Configuration
======================
SPAN 1: CCS/HDB3 Build-out: 0 db (CSU)/0-133 feet (DSX-1)
Channel map:
Channel 01: Clear channel (Default) (Slaves: 01)
Channel 02: Clear channel (Default) (Slaves: 02)
Channel 03: Clear channel (Default) (Slaves: 03)
.......................
Channel 30: Clear channel (Default) (Slaves: 30)
Channel 31: Clear channel (Default) (Slaves: 31)
31 channels to configure.
ZT_SPANCONFIG failed on span 1: Device not configured (6)
During the installation was fine, not made any mistake,
settings are:
#############cha_dahdi.conf:#####################
group=1
signalling=pri_cpe
switchtype=euroisdn
context=incoming
channel=1-15,17-31
###############zaptel.conf########################
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
If anyone knows of something please give me a hand in this topic.
Thank you very much.
Att.
Wendell S. Bandeira
Sorry my bad english
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
Asterisk-BSD mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-bsd
