Check the Makefile and make sure your PROC is set to something other than 686
Jared On Mon, 2003-07-28 at 02:27, Thomas Haeger wrote: > Hi all, > > i tried to get work asterisk on a VIA EPIA 5000 board. > I have installed "debian woody" (this HDD worked fine on an other machine > before). > > But if i try to start asterisk the following message occurs: > > ..... > [SetAccount] > == Registered application 'SetAccount' > [SetGlobalVar] > == Registered application 'SetGlobalVar' > [SetLanguage] > == Registered application 'SetLanguage' > [SetVar] > == Registered application 'SetVar' > [StripMSD] > == Registered application 'StripMSD' > [Suffix] > == Registered application 'Suffix' > [Wait] > == Registered application 'Wait' > Asterisk Dynamic Loader Starting: > == Parsing '/etc/asterisk/modules.conf': Found > [chan_modem.so]Illegal instruction > > It seems that the minute where asterisk try to load the first module the > error occurs. > > If i take this module out of the modules.conf with "noload => > chan_modem.so", another module let occur this error, but not all. > > Are there any known problems running astersik on a VIA board ? > > > Thanks for help, > > Thomas. > > _______________________________________________ > Asterisk-Dev mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-dev _______________________________________________ Asterisk-Dev mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-dev
