Or - we could put a small notice like "Only for phones that support the check-sync NOTIFY message"? If anyone has any specs on other SIP phones on remote rebooting, I'll be happy to add it in. Granted I won't be able to fully test it out - but I'll be willing to help. :-)
-----Original Message----- From: James Golovich [mailto:[EMAIL PROTECTED] Sent: Friday, August 29, 2003 4:48 PM To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Dev] SIP Phone reset from CLI On Fri, 29 Aug 2003, DUSTIN WILDES wrote: > Hi all! > > I've included a diff that will give you two new CLI options: > 1) sip reset phone all > 2) sip reset phone 1000 > > These two features will either reboot all your SIP phones or just the extension you > specified. > This will help whenever you've added a new firmware image into your /tftpboot > directory - or just need to reboot the phones for whatever reason. > The only configuration needed is to have a syncinfo.xml listed in your /tftpboot > directory & be sure you've set your 'sync' option in SIPDefault.cnf (or the specific > phone .cnf file) > > #### /tftpboot/syncinfo.xml > > <SYNCINFO> > <IMAGE VERSION="*" SYNC="0"/> > <IMAGE VERSION="P0S3-05-3-00" SYNC="1"/> > </SYNCINFO> > > > ##### /tftpboot/SIPDefault.cnf > # Sync value of the phone used for remote reset > sync: 1 ; Default 1 > I don't know if this should really be in cvs, unless its a feature that is supported by all phones and not just the cisco phones. James _______________________________________________ Asterisk-Dev mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-dev _______________________________________________ Asterisk-Dev mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-dev