Kevin P. Fleming wrote: > Andrew Kohlsmith wrote: > >> The hardware did not change (P4 MicroStar 865PE Neo2-V) and MSI >> mainboards aside, what changed in *ASTERISK* to make this break? > > As has already been documented on IRC, a change was committed to > chan_zap to make these messages appear at a level lower than 'debug'. > (bug #4107) > > The purpose of this was to make people actually aware that the Zaptel > drivers were not accepting data they should be; if this is happening > on your system, then it seems to be reasonable that we need to find > out why that is happening, since the drivers should always be able to > accept data from chan_zap.
Allow me to raise my hand and say "I am recieving this error" too. However, I was not recieving this error until I changed my zaptel.conf from: span => 1,0,0,b8zs,esf to span => 1,1,0,b8zs,esf Before, when timing was set to 0, no errors but bad faxes using spandsp. Faxes would recieve fine but would be 8.5 x 10 in some cases. Changed to timing 1 and now faxes are perfect, but I get the error. I don't get the error that often. But I get it nonetheless.. -Matthew _______________________________________________ Asterisk-Dev mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
