Hi Doug,
thanks for answering.
I do not understand what could change if I used G instead of g....g
makes asterisk call starting from channel 1, G from the last but
wouldn't be the same?? Asterisk would complain about last channel
instead of the first.
I'd like to know why this happens...is it about an incoming call which
cannot be managed?? So the line would be busy...do not know...
Giorgio "confused" Incantalupo
Doug Lytle wrote:
Giorgio Incantalupo wrote:
I read on internet that it is due to the telco which send request to
establish a call on a channel but Asterisk has not freed it yet....is
it true?
Is it a bug or can be avoided setting some parameter inside zapata.conf?
This may be glare. If your incoming calls start at channel 1 and you
are using 'g' instead of 'G' in your group settings for the PRI, then
it's probably the case. The fix would be to change all your lower
case g's into upper case. Then, all outbound calls with start with
your last channel instead of the first.
Doug
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com --
asterisk-dev mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-dev