Hello, E1s usually uses HDB3 line coding (or AMI line coding) with optional CRC4 checking, so B8SZ coding is totally wrong. span=1,1,0,ccs,hdb3, span=2,2,0,ccs,hdb3, span=3,3,0,ccs,hdb3, span=4,4,0,ccs,hdb3,
>From top of /etc/zaptel.conf: # The framing is one of "d4" or "esf" for T1 or "cas" or "ccs" for E1 # Note: "d4" could be referred to as "sf" or "superframe" # The coding is one of "ami" or "b8zs" for T1 or "ami" or "hdb3" for E1 # E1's may have the additional keyword "crc4" to enable CRC4 checking WBR, Paul. ----- Original Message ----- From: "Dome C." <[EMAIL PROTECTED]> To: "Asterisk Developers Mailing List" <[email protected]>; "Commercial and Business-Oriented Asterisk Discussion" <[email protected]> Sent: Saturday, September 16, 2006 12:25 PM Subject: [asterisk-dev] Need help for 4E1 config > Hi Martin and All, > > Can some one help me config for 4E1 Card (Order From > e400p.pbxhardware.com) and Eurotech Multicell PRI Gateway. > Now l can load driver but got alram YEL/RED/GREEN > This is my zatel.conf > > span=1,1,0,esf,b8zs > span=2,0,0,esf,b8zs > span=3,0,0,esf,b8zs > span=4,0,0,esf,b8zs > > # Span 1 > bchan=1-15 > dchan=16 > bchan=17-31 > # Span 2 > bchan=32-46 > dchan=47 > bchan=48-62 > # Span 3 > bchan=63-77 > dchan=78 > bchan=79-93 > # Span 4 > bchan=94-108 > dchan=109 > bchan=110-124 > loadzone = fr > defaultzone = fr > > > > Best Regards. > > Dome C. > > _______________________________________________ > --Bandwidth and Colocation provided by Easynews.com -- > > asterisk-dev mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-dev > _______________________________________________ --Bandwidth and Colocation provided by Easynews.com -- asterisk-dev mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
