----------------------------------------------------------- This is an automatically generated e-mail. To reply, visit: https://reviewboard.asterisk.org/r/3976/ -----------------------------------------------------------
(Updated Sept. 18, 2014, 6:55 p.m.) Review request for Asterisk Developers. Changes ------- Addressed Richard's comments. Repository: Asterisk Description ------- This module allows res_pjsip to integrate with res_phoneprov and depends on the res_phoneprov refactor (r3970). A new pjsip.conf object is defined by this module... ;============EXAMPLE PHONEPROV CONFIGURATION================================ ; Before configuring provisioning here, see the documentation for res_phoneprov ; and configure phoneprov.conf appropriately. ; For each user to be autoprovisioned, a [phoneprov] configuration section ; must be created. At a minimum, the 'type', 'PROFILE' and 'MAC' variables must ; be set. All other variables are optional. ; Example: ;[1000] ;type=phoneprov ; must be specified as 'phoneprov' ;endpoint=1000 ; Required only if automatic setting of ; USERNAME, SECRET, DISPLAY_NAME and CALLERID ; are needed. ;PROFILE=digium ; required ;MAC=deadbeef4dad ; required ;SERVER=myserver.example.com ; A standard variable ;TIMEZONE=America/Denver ; A standard variable ;MYVAR=somevalue ; A user confdigured variable ; If the phoneprov sections have common variables, it is best to create a ; phoneprov template. The example below will produce the same configuration ; as the one specified above except that MYVAR will be overridden for ; the specific user. ; Example: ;[phoneprov_defaults](!) ;type=phoneprov ; must be specified as 'phoneprov' ;PROFILE=digium ; required ;SERVER=myserver.example.com ; A standard variable ;TIMEZONE=America/Denver ; A standard variable ;MYVAR=somevalue ; A user configured variable ;[1000](phoneprov_defaults) ;endpoint=1000 ; Required only if automatic setting of ; USERNAME, SECRET, DISPLAY_NAME and CALLERID ; are needed. ;MAC=deadbeef4dad ; required ;MYVAR=someOTHERvalue ; A user confdigured variable ; To have USERNAME and SECRET automatically set, the endpoint ; specified here must in turn have an outbound_auth section defined. ; Fuller example: ;[1000] ;type=endpoint ;outbound_auth=1000-auth ;callerid=My Name <8005551212> ;transport=transport-udp-nat ;[1000-auth] ;type=auth ;auth_type=userpass ;username=myname ;password=mysecret ;[phoneprov_defaults](!) ;type=phoneprov ; must be specified as 'phoneprov' ;PROFILE=someprofile ; required ;SERVER=myserver.example.com ; A standard variable ;TIMEZONE=America/Denver ; A standard variable ;MYVAR=somevalue ; A user configured variable ;[1000](phoneprov_defaults) ;endpoint=1000 ; Required only if automatic setting of ; USERNAME, SECRET, DISPLAY_NAME and CALLERID ; are needed. ;MAC=deadbeef4dad ; required ;MYVAR=someUSERvalue ; A user confdigured variable ;LABEL=1000 ; A standard variable ; The previous sections would produce a template substitution map as follows: ;MAC=deadbeef4dad ;added by pp1000 ;USERNAME=myname ;automatically added by 1000-auth username ;SECRET=mysecret ;automatically added by 1000-auth password ;PROFILE=someprofile ;added by defaults ;SERVER=myserver.example.com ;added by defaults ;SERVER_PORT=5060 ;added by defaults ;MYVAR=someUSERvalue ;added by defaults but overdidden by user ;CALLERID=8005551212 ;automatically added by 1000 callerid ;DISPLAY_NAME=My Name ;automatically added by 1000 callerid ;TIMEZONE=America/Denver ;added by defaults ;TZOFFSET=252100 ;automatically calculated by res_phoneprov ;DST_ENABLE=1 ;automatically calculated by res_phoneprov ;DST_START_MONTH=3 ;automatically calculated by res_phoneprov ;DST_START_MDAY=9 ;automatically calculated by res_phoneprov ;DST_START_HOUR=3 ;automatically calculated by res_phoneprov ;DST_END_MONTH=11 ;automatically calculated by res_phoneprov ;DST_END_MDAY=2 ;automatically calculated by res_phoneprov ;DST_END_HOUR=1 ;automatically calculated by res_phoneprov ;ENDPOINT_ID=1000 ;automatically added by this module ;AUTH_ID=1000-auth ;automatically added by this module ;TRANSPORT_ID=transport-udp-nat ;automatically added by this module ;LABEL=1000 ;added by user Diffs (updated) ----- branches/12/res/res_pjsip_phoneprov_provider.c PRE-CREATION branches/12/configs/pjsip.conf.sample 423501 Diff: https://reviewboard.asterisk.org/r/3976/diff/ Testing ------- I'm already starting to convert sip peers to pjsip endpoints with no change to my Grandstream templates. Thanks, George Joseph
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-dev mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev