Howdy, Support for the TDM410, among others, was removed from the DAHDI 3.x driver packages. Those cards went end of sale on February 1 of 2014, and Digium (Sangoma) do not test them as a part of any releases. The README (iirc) in the package should list the cards still supported in the 3.x releases.
Cheers On Mon, Feb 4, 2019 at 11:02 AM Daniel McFarlane <dan...@szeto.ca> wrote: > Hello, > > I hope someone can help me as I've been struggling with this for almost > 2 days now and am unable to find anything that works in my web searches. > > I am trying to upgrade my test system from Asterisk 11 to Asterisk > 16.1.1, along with dahdi-linux-complete-3.0.0+3.0.0 and libpri-1.6.0 > (with the intentions of then upgrading an active system once I have ran > tests to make sure everything works). > > I am currently stuck at the DAHDI level. Here are the details: > > 1) I am having trouble with the loading of the drivers for my TDM410 > card. I have checked and the required wcte13xp drivers are included > and installed from the new dahdi-linux-complete-3.0.0+3.0.0 package. > They even show up as being loaded when I run lsmod|grep dahdi. > > 2) The card is detected on the system and was working fine (+ works fine > if I re-install the older dahdi-linux-complete-2.10.0.1 drivers I had > working before). When it does work lspci correct displays: "Kernel > driver in use: wcte13xp". Unfortunately no kernel module shows up when > DAHDI 3.0.0 is installed. > > 3) From what I can tell, as a result of the driver not getting loaded to > the run this card, I get the following error when I try to start up > DAHDI (the same configurations work perfectly and DAHDI starts up > if/when the DAHDI 2.10.0.1 drivers are installed): > > Selected signaling not supported > Possible causes: > FXS signaling is being used on a FXS interface (use a FXO signaling > variant) > RBS signaling is being used on a E1 CCS span > Signaling is being assigned to channel 16 of an E1 CAS span > > I have tried re-installing, manually removing the old version even and > consistently get a problem with the DAHDI drivers not loading for my > analog card (if I comment out the FXS/FX0 ports then DAHDI comes up fine > with my PRI). > > How do I correct this issue? > > Thank You, > > Daniel > > > -- > _____________________________________________________________________ > -- Bandwidth and Colocation Provided by http://www.api-digital.com -- > > asterisk-dev mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-dev -- -------------------------------------------------- Malcolm Davenport Digium - a Sangoma company | Senior Product Manager 445 Jan Davis Drive NW - Huntsville, AL 35806 - US Tel/Fax: +1 256 428 6252 malco...@sangoma.com
-- _____________________________________________________________________ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-dev mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-dev
