Thank you for reading my doc and thanks for the corrections. :) ----- Original Message ----- From: "Mats Karlsson" <[EMAIL PROTECTED]> To: "Discussions regarding The Asterisk Documentation Project" <[email protected]> Sent: Thursday, August 11, 2005 3:23 PM Subject: Re: [Asterisk-doc] Connecting to a PRI
> Gene Naden wrote: > > Here is my explanation of the issues involved in connecting to a PRI. I am > > open to feedback, corrections, comments. This is a text file with line > > breaks. > > > > Gene Naden, MA > > Programmer Analyst > > GlobalTeldata II, LLC > > 4700 N. Ravenswood > > Chicago, IL 60640 > > (773) 878-3161 x 223 > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Asterisk-Doc mailing list > > [email protected] > > http://lists.digium.com/mailman/listinfo/asterisk-doc > > Nice work Gene, > > But maybe you could correct the : > > A PRI is a 24-channel > to > A PRI is a multi channel > > And then correct the text in the document to reflect that PRI can be > either T1 or E1 and that T1 is 24 channels and E1 is 30 channels. > > > And it is RJ48C that is used for connecting T1/E1's, the pinout differs > to RJ45's but its the same type of 8 pin connector. > > Ref. http://www.arcelect.com/RJ48C_and_RJ48S_8_position_jack_.htm > > > /Mats > > _______________________________________________ > Asterisk-Doc mailing list > [email protected] > http://lists.digium.com/mailman/listinfo/asterisk-doc > _______________________________________________ Asterisk-Doc mailing list [email protected] http://lists.digium.com/mailman/listinfo/asterisk-doc
