Once I got the wires plugged into the right ports, I discovered ztcfg wasn't running, fixed that. Now a softphone can call out but a handset can't.
Here is a little more info: # asterisk -vvvvvvr Asterisk 1.4.21.2, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer <[email protected]> Asterisk comes with ABSOLUTELY NO WARRANTY; type 'core show warranty' for details. This is free software, with components licensed under the GNU General Public License version 2 and other licenses; you are welcome to redistribute it under certain conditions. Type 'core show license' for details. ========================================================================= == Parsing '/etc/asterisk/asterisk.conf': Found == Parsing '/etc/asterisk/extconfig.conf': Found Connected to Asterisk 1.4.21.2 currently running on asterisk (pid = 3223) Verbosity is at least 6 asterisk*CLI> zap show channels Chan Extension Context Language MOH Interpret pseudo DLPN_DialPlan1 default 1 DID_trunk_1 default 4 DLPN_DialPlan1 default With the handset on hook: asterisk*CLI> zap show channel 4 Channel: 4LI> File Descriptor: 25 Span: 1k*CLI> Extension: I> Dialing: noI> Context: DLPN_DialPlan1 Caller ID: 6002 Calling TON: 0 Caller ID name: Bob Crandell Destroy: 0LI> InAlarm: 0LI> Signalling Type: FXO Kewlstart Radio: 0*CLI> Owner: <None> Real: <None>> Callwait: <None> Threeway: <None> Confno: -1LI> Propagated Conference: -1 Real in conference: 0 DSP: nok*CLI> Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: ulaw Fax Handled: no Pulse phone: no Echo Cancellation: 128 taps, currently OFF Actual Confinfo: Num/0, Mode/0x0000 Actual Confmute: No Hookstate (FXS only): Onhook With the handset off hook: asterisk*CLI> zap show channel 4 Channel: 4LI> File Descriptor: 25 Span: 1k*CLI> Extension: I> Dialing: noI> Context: DLPN_DialPlan1 Caller ID: 6002 Calling TON: 0 Caller ID name: Bob Crandell Destroy: 0LI> InAlarm: 0LI> Signalling Type: FXO Kewlstart Radio: 0*CLI> Owner: <None> Real: <None>> Callwait: <None> Threeway: <None> Confno: -1LI> Propagated Conference: -1 Real in conference: 0 DSP: nok*CLI> Relax DTMF: no Dialing/CallwaitCAS: 0/0 Default law: ulaw Fax Handled: no Pulse phone: no Echo Cancellation: 128 taps, currently OFF Actual Confinfo: Num/0, Mode/0x0000 Actual Confmute: No Hookstate (FXS only): Onhook On Tue, 2009-02-17 at 14:05 -0600, Ryan Brindley wrote: > Bob, > If you're in Asterisk's CLI, make sure you have verbosity past 3 > ('core set verbose 3') and then try to make an outbound call. You > should see a bit of dialplan scroll on the screen and look for errors > there. Copy and paste em here if you find any and don't know what to > do. > -- > Ryan Brindley > Digium, Inc. | Software Developer > 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA > main: +1 256-428-6000 fax: +1 256-864-0464 > Check us out at: http://digium.com & http://asterisk.org > > ----- Original Message ----- > From: "Bob Crandell" <[email protected]> > To: "Asterisk GUI" <[email protected]> > Sent: Tuesday, February 17, 2009 1:30:07 PM GMT -06:00 US/Canada > Central > Subject: [asterisk-gui] Dialing out > > Hi All, > > Fresh install. There are 2 Digium cards, 1 with 2 FXO ports and 1 > with > 2 FXS ports. These show up in "Configure Hardware". I added a trunk > with these ports, configured Outgoing Calling Rules, setup a dial plan > that included everything and added 2 users which can call each other. > > Neither user can call out. There are no errors in the log that I can > see. > > What did I miss? > > Thanks > -- > Bob Crandell > Assured Computing, Inc. > http://www.assuredcomp.com/ > 541-868-0331 > ComputerBase > http://www.computerbaseusa.com/ > 541-349-0404 > > _______________________________________________ > --Bandwidth and Colocation Provided by http://www.api-digital.com-- > > asterisk-gui mailing list > To UNSUBSCRIBE or update options visit: > http://lists.digium.com/mailman/listinfo/asterisk-gui >
_______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-gui mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-gui
