Christoph,
I recently did some work when both mISDN and DAHDI are installed. You should be
fine since you've installed mISDN before DAHDI. From what the hardware guru's
told me, if you want mISDN to control the BRI cards all you need to make sure
happens is that mISDN loads before DAHDI. And I think that'll happen for you
because you installed mISDN before DAHDI. If not though, you can just change
the load sequence in /etc/init.d/ (I think). I don't remember, but they knew
the "command" to set priority.
--
Ryan Brindley
Digium, Inc. | Software Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
main: +1 256-428-6000 fax: +1 256-864-0464
Check us out at: http://digium.com & http://asterisk.org
----- Original Message -----
From: "Christoph Krell" <[email protected]>
To: "Asterisk GUI project discussion" <[email protected]>
Sent: Tuesday, June 30, 2009 8:59:08 AM GMT -06:00 US/Canada Central
Subject: Re: [asterisk-gui] GUI Infinite loop, no DAHDI installed
Ryan,
Thanks for your quick answer, it is nice to see that this list is
maintained so well, keep up the good work!
Regarding DAHDI:
I am gonna try and install it, but I fear it will cause problems with
the installed mISDN drivers for my E1-card, and with the new asterisk
versions, mISDN tends to be very sensitive ;-)
Is there a "light-installer" that only installes the asterisk-modules
and the dummy-drivers?
Thanks for your help so far,
best regards,
Christoph
Ryan Brindley schrieb:
> Christoph,
> Good news and bad news. Good first, you're not crazy nor doin anything
> wrong, temporarily this can be avoided by installing DAHDI (if you
> choose to do so, its not in the asterisk source, it has its own,
> http://svn.asterisk.org/svn/dahdi/linux-complete/tags/2.2.0+2.2.0/).
> It might be a good idea anyway if you decide to do anything involving
> timing (such as music on hold and conference calls).
>
> Ok now the bad news, the world is ending. Just kidding. This is,
> unfortunately, not the first time this issue has come up. Last time I
> checked that part of the code, the GUI shouldn't even try to run
> dahdi_genconf if dahdi isn't installed, but I guess there is something
> still missing.
>
> If you can, report this issue at http://issues.asterisk.org (under the
> Asterisk-GUI project) and I'll take a look at the code and find whats
> causing this. But if you need something resolved immediately I'd just
> install DAHDI and wait for the fix :-)
> --
> Ryan Brindley
> Digium, Inc. | Software Developer
> 445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
> main: +1 256-428-6000 fax: +1 256-864-0464
> Check us out at: http://digium.com & http://asterisk.org
>
> ----- Original Message -----
> From: "Christoph Krell" <[email protected]>
> To: [email protected]
> Sent: Tuesday, June 30, 2009 8:00:29 AM GMT -05:00 US/Canada Eastern
> Subject: [asterisk-gui] GUI Infinite loop, no DAHDI installed
>
> Hi List,
>
> I just upgraded my old asterisk to 1.4.25.1, and i thought i give the
> GUI a try since we need it to dynamically generate extension entries.
>
> I installed the GUI from the svn (GUI-version : SVN-branch-2.0-r4947),
> but as soon as I try to log in, the GUI is stuck in a loop, it looks
> like it trys to run dahdi_genconf, which then fails.
>
> I get the following in the CLI:
> WARNING[14499]: app_system.c:107 system_exec_helper: Unable to execute
> 'dahdi_genconf'
>
> I haven't even DAHDI installed. To check it, i ran make menuselect
> again, and the chan_dahdi was not selected.
>
> I found some hints towards file restrictions, so I changed them, but it
> didn't work.
>
> I would appreciate any help, thanks
>
> --
>
> Christoph Krell
> Technik
>
>
>
>
>
>
> --
>
> Christoph Krell
> Technik
>
> ________________________________________________________________________________
>
>
> Xidras GmbH
> Stockern 47
> 3744 Stockern
> Austria
>
> Tel: +43 (0) 2983 201-30507
> Fax: +43 (0) 2983 201-305079
> Email: [email protected]
> Web: http://www.xidras.com
>
> FN 317036 f | Landesgericht Krems | ATU64485024
>
> ________________________________________________________________________________
>
>
> VERTRAULICHE INFORMATIONEN!
> Diese eMail enthält vertrauliche Informationen und ist nur für den
> berechtigten
> Empfänger bestimmt. Wenn diese eMail nicht für Sie bestimmt ist,
> bitten wir Sie,
> diese eMail an uns zurückzusenden und anschließend auf Ihrem Computer und
> Mail-Server zu löschen. Solche eMails und Anlagen dürfen Sie weder
> nutzen,
> noch verarbeiten oder Dritten zugänglich machen, gleich in welcher Form.
> Wir danken für Ihre Kooperation!
>
> CONFIDENTIAL!
> This email contains confidential information and is intended for the
> authorised
> recipient only. If you are not an authorised recipient, please return
> the email
> to us and then delete it from your computer and mail-server. You may
> neither
> use nor edit any such emails including attachments, nor make them
> accessible
> to third parties in any manner whatsoever.
> Thank you for your cooperation
>
> ________________________________________________________________________________
>
>
>
>
>
>
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
> ------------------------------------------------------------------------
>
> _______________________________________________
> --Bandwidth and Colocation Provided by http://www.api-digital.com--
>
> asterisk-gui mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-gui
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-gui
_______________________________________________
--Bandwidth and Colocation Provided by http://www.api-digital.com--
asterisk-gui mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-gui
