Hi Guys... I allready made a trial of the leibct/sangoma solution tcap/map for ati purpose, no problem at all. quick installation, easy to use, very cheap. This solution can be found on sigtran too.
You can find them at www.leibct.com or [email protected] I hope this info will helpe someone rv 2009/10/28, Paul Bagyenda <[email protected]>: > Essentially what you need is the ability to send the signalling > traffic over IP, right? > > A while back I posted our initial attempts at getting this in place: > http://www.mail-archive.com/[email protected]/msg02760.html > > Essentially the first thing that's needed is M3UA. Attached is a diff > and two files to get this to work with libss7. Beyond that you need > SCCP (for most MAP that's class 0 and 1, which is easy to add). Not > done work on that (yet). Then MAP, decoding/encoding of which is not > difficult with the write asn.1 lib/tools. > > All the same, here is the m3ua code, perhaps it can serve as a start. > > > > On Oct 27, 2009, at 14:47, Marco Cordeiro wrote: > >> Hello All, >> >> I know that this subject has been discussed many times here, but >> since I haven't been following the list lately, I'll bring it up >> again. >> >> Do you have any updates on MAP support for libss7 ? >> >> I'll explain my problem, any maybe you could give me suggestions. >> >> I'm trying to integrate two MSCs (Mobile Switch) that currently are >> connected thru a dedicated link (Voice + Signalling) that costs a >> lot per month, once the two locations are very far from each other >> (about 3000 Km). The idea is to integrate them thru the internet. >> >> The voice channels must be ISUP, and related to that the current >> version of libss7 is perfect, some tests have being made and it >> works perfectly, running an Asterisk in each location, locally >> connected to the MSC with and ISUP link, and the traffic being >> exchanged thru and IAX trunk between the 2 servers. >> >> Now the idea is to also migrate SS7 MAP signalling between this two >> locations. Currently location "A" holds the HLR for the whole >> signalling network, and location "B" has to check HLR's database for >> mobile's profile. I was thinking about doing the same setup used for >> voice channels, but now used for SS7 MAP signalling. >> >> I now that there are many solutions in the market for that, such as >> CISCO ITP Routers (SS7 over IP), SS7 tunneling devices, but I would >> like to try a cost effective solution using asterisk if possible. >> >> Rgs, >> >> Marco Cordeiro >> [email protected] >> _______________________________________________ >> --Bandwidth and Colocation Provided by http://www.api-digital.com-- >> >> asterisk-ss7 mailing list >> To UNSUBSCRIBE or update options visit: >> http://lists.digium.com/mailman/listinfo/asterisk-ss7 > > _______________________________________________ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-ss7 mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-ss7
