Hi Krzysztof,
Thank you for your reply. It is greatly appreciated!
Please find my responses below.
>Alignment on link does not mean that - you start counting CICs from
"1" and your partner does the same (one is one on both sides, some telco
switches count 1st >CIC as 0, or even 2).
Yes. That makes sense.
>Here you say, that first available channel has logical number one, and
>you try to make 1st call on CIC 1, so it looks good.
>Maybe simply - you should try to disable one E1 link? Simply comment
>out - the second E1 and see if it's not mis-cabling ?
The system is in another African country so instead of me physically
pulling out the E1 cable from the system I tested by 'blocking' certain
CICs in my linkset1 by using the 'ss7 block cic 1 [channel]' command.
The provider said that he could see the corresponding blocked CICs and
they appeared to match up to his CICs. Unfortunately without me being at
the same physical location I am unable to view the provider's equipment
and logs to verify that the CICs are actually matching on his side.
>If the same "no audio" happen on the only one digital link (one E1) -
>it's in 99.999% - mis numbered CIC - have you access to any passive
>"recording" equipment ?
>Another Sangoma card with at least 2 ports could allow for listening
>if audio is being put on any timeslot (CIC, timeslot, Bchannel - call
>it as you wish).
Unfortunately I don't have access to recording equipment or another
Sangoma card.
Something I have picked up in my Asterisk log is the following:
/[Aug 1 20:01:21] VERBOSE[30284] chan_dahdi.c: Resetting CIC 47
[Aug 1 20:01:21] WARNING[30284] chan_dahdi.c: RSC on unconfigured CIC 47
[Aug 1 20:01:51] VERBOSE[30284] chan_dahdi.c: Resetting CIC 63
[Aug 1 20:01:51] WARNING[30284] chan_dahdi.c: RSC on unconfigured CIC 63/
Could this possibly confirm the CIC alignment problem that we suspect? I
don't have a bchan/CIC configured for 47 or 63
Applicable piece from chan_dahdi.conf:
;First E1
sigchan=16
cicbeginswith=1
channel=1-15
cicbeginswith=17
channel=17-31
;Second E1
sigchan=47
cicbeginswith=32
channel=32-46
cicbeginswith=48
channel=48-62
Thank you for your assistance so far!
Get important Linux and industry-related news at: facebook.com/dcdata
<http://facebook.com/dcdata>
Kind regards,
David Wilson
CNS,CLS, LINUX+, CLA, DCTS, LPIC3
*LinuxTech CC t/a DcData*
CK number: 2001/058368/23
*Website:* http://www.dcdata.co.za
*Support:* +27(0)860-1-LINUX
*Mobile:* +27(0)824147413
*Tel:* +27(0)333446100
*Fax:* +27(0)866878971
On 08/01/2012 06:41 PM, Krzysztof Drewicz wrote:
2012/8/1 David Wilson<d...@dcdata.co.za>
With debugging enabled on my SS7 linkset I see the following in my logs. Unfortunately
not being familiar with SS7 it doesn't mean too much to me. Everything that I've read
indicates that a "no audio" problem with SS7 generally indicates misaligned
CICs but according to the operator they are reported to be aligned ok.
Alignment on link does not mean that - you start counting CICs from
"1" and your partner does the same (one is one on both sides, some
telco switches count 1st CIC as 0, or even 2).
CIC: 1
;Sangoma A102 port 1 [slot:4 bus:12 span:1]<wanpipe1>
So - it should be 1st CIC
;First E1
sigchan=16
cicbeginswith=1
channel=1-15
Here you say, that first available channel has logical number one, and
you try to make 1st call on CIC 1, so it looks good.
Maybe simply - you should try to disable one E1 link? Simply comment
out - the second E1 and see if it's not mis-cabling ?
If the same "no audio" happen on the only one digital link (one E1) -
it's in 99.999% - mis numbered CIC - have you access to any passive
"recording" equipment ?
Another Sangoma card with at least 2 ports could allow for listening
if audio is being put on any timeslot (CIC, timeslot, Bchannel - call
it as you wish).
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
