Hi,
once you define sigchan - all channels (CICs) defined before that are
used for that link. When you define new channels after that - they will
belong to the next one.
Just move the block below at the end and you are done:
ss7type=itu
networkindicator=national
linkset=1
pointcode=4
adjpointcode=1
defaultdpc=3
sigchan=1
sigchan=32
ss7type=itu
networkindicator=national
linkset=2
pointcode=4
adjpointcode=2
defaultdpc=3
sigchan=63
sigchan=94
P.S. To actually use SS7 timers you need to define them for each linkset
... just use "#include ss7.timers" for each one after sigchans
On 2013-08-13 10:13, Frederic Van Espen wrote:
Hi,
I have 5 E1's connected to my asterisk box. These are connected to 2
STP's (pointcodes 1 and 2) through a MGW. Behind the STP's there's an
MSC (pointcode 3). Our box is assigned pointcode 4.
The first channel of the first 4 E1's are signalling channels. The
first 2 E1's are set towards STP1, the 2 following towards STP2. The
fifth one is not clear to me where it is going (Does it matter?
There;s only CIC's on this E1) How would I go about configuring
chan_dahdi.conf? I'm using the patched asterisk 11.5.0 with the
patched libss7 as described in
https://issues.asterisk.org/jira/browse/SS7-27?focusedCommentId=208465&page=com.atlassian.jira.plugin.system.issuetabpanels:comment-tabpanel#comment-208465
Here's what I currently have:
[channels]
switchtype=EuroISDN
context=incoming
group=1
ss7type=itu
signalling=ss7
networkindicator=national
linkset=1
pointcode=4
adjpointcode=1
defaultdpc=3
sigchan=1
sigchan=32
ss7type=itu
networkindicator=national
linkset=2
pointcode=4
adjpointcode=2
defaultdpc=3
sigchan=63
sigchan=94
ss7_called_nai=national
ss7_calling_nai=national
ss7_internationalprefix=
ss7_nationalprefix=
ss7_subscriberprefix=
ss7_unknownprefix=
echocancel=yes
echocancelwhenbridged=no
echotraining=no
pridialplan=unknown
prilocaldialplan=unknown
cicbeginswith=34
channel=2-31
cicbeginswith=66
channel=33-62
cicbeginswith=98
channel=64-93
cicbeginswith=130
channel=95-124
cicbeginswith=161
channel=125-155
For some incoming IAM's I see this in the logs:
[Aug 13 09:07:31] VERBOSE[31407] sig_ss7.c: [Aug 13 09:07:31] Linkset
0: Processing event: ISUP_EVENT_IAM
Linkset 0! It seems like asterisk can not detect the linkset on which
theis message entered.
Any thoughts and/or recommendations?
Thanks,
Frederic
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --
asterisk-ss7 mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-ss7
