There are two problems we're having now.
1 - From watching the udp fly by, it seems that iconnect does not know when we hang up. For example, if I call a voice mail and it starts giving me its speal and I hang up, iconnect stays connected until the VM hangs up at its end.
Next, if we try to call out via iconnect from a sip client extension (like a windows soft phone) all we hear is horrible noise.
Has anyone else had these issues?
Jim
--On Tuesday, March 11, 2003 3:34 PM -0500 Gregg Lebovitz <[EMAIL PROTECTED]> wrote:
I haven't play around enough to know whether or not the 7777 prefix is a toggle. I will do some experimenting and let you know. Right now I am prefixing all my calls with 7777.
My experience is that when the carrier's format is G723.1, you can't hear the incoming voice. When it is in G711 you can. I have made several calls using G711 and they are acceptable quality. Note that if you disallow=gsm in the sip.conf file you will get the 488 media errors you reported earlier.
Below are my config files for sip and the linejack cards:
; ; SIP Configuration for Asterisk ; [general] port = 5060 ; Port to bind to bindaddr = 0.0.0.0 ; Address to bind to context=iconnect ; Default for incoming calls allow=gsm allow=ulaw allow=alaw
;register=1813342XXXX:[EMAIL PROTECTED] ;register=1202454XXXX:[EMAIL PROTECTED]
[iconnecthere] type=friend username=XXXXXXXX secret=XXX host=sipauth.deltathree.com
; ; Linux Telephony Interface ; ; Configuration file ; [interfaces]
mode=dialtone format=ulaw echocancel=medium silencesupression=no
context=local context=default
txgain=100% rxgain=100% device => /dev/phone0
On Tue, 2003-03-11 at 14:28, Jim Archer wrote:Hi Greg and thanks very much...
A few questions...
First, regarding the 7777 prefix, it seemed that this acts as a toggle, switching from the one codec to the other. But how do I set which me system uses by default? Or does iconnect always use the high bandwidth one by default (such that the 7777 always switches to the low bandwidth one)?
Next, I am still struggling to understand the SIP options and what goes where. Could you please tell me where the format command goes? Is this an option on the channel? I thing the allow goes in sip.conf.
Finally, does this have any impact on the problem where the person called can not be heard?
Thanks!!!
Jim
--On Tuesday, March 11, 2003 1:35 PM -0500 Gregg Lebovitz <[EMAIL PROTECTED]> wrote:
> Jim, > > I changed my extensions entry for iconnect to: > > exten => _1XXXXXXXXXX,1,Dial,SIP/[EMAIL PROTECTED] > > and my calls work fine with ulaw. I am calling from a linejack card > with format=ulaw and SIP with allow=ulaw. > > Gregg > > On Mon, 2003-03-10 at 23:01, Jim Archer wrote: >> --On Monday, March 10, 2003 4:47 PM -0300 Dan Fernandez >> <[EMAIL PROTECTED]> wrote: >> >> > Iconnect uses codecs g723 and g711 that can be configured for each >> > account (you can change them by the 7777 prefix) >> >> I tried adding the 7777 in front of a number and it reliably generates >> error "488 invalid media." >> >> >> _______________________________________________ >> Asterisk-Users mailing list >> [EMAIL PROTECTED] >> http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users