You can use "debug channel <channel>" on asterisk console to find out which channel sends disconnect/hangup .... You have to trace all the channels on both of your systems.
regards Martin On Thu, 27 Mar 2003, diana wrote: > Hello, > > I have a very complicated system which contains 2 *'s. > > PSTN --- CISCO --- H.323 --- 1 Asterisk --- IAX --- 2 Asterisk --- PSTN > > In the middle of conversation i get a Hangup. I get this logs when it > disconnect on the 2 Asterisk. > I must metion that the call is originated by Cisco, and i can't make any > calls to the Cisco. > > Rx-Frame Retry[N/A] -- Seqno: 12 Type: IAX Subclass: ACK > > Protocol Discriminator: Q.931 (8) len=9 > > Call Ref: len= 2 (reference 6/0x6) (Originator) > > Message type: DISCONNECT (69) > > Cause (len= 2) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 > Location: Private network serving the local user (1) > > Ext: 1 Cause: Normal Clearing (16), class = Normal > Event (1) ] > -- Hungup 'Zap/3-1' > == Spawn extension (flux1, 11011, 1) exited non-zero on > '[EMAIL PROTECTED]/2' > Tx-Frame Retry[000] -- Seqno: 13 Type: IAX Subclass: HANGUP > -- Hungup '[EMAIL PROTECTED]/2' > Rx-Frame Retry[N/A] -- Seqno: 13 Type: IAX Subclass: ACK > < Protocol Discriminator: Q.931 (8) len=5 > < Call Ref: len= 2 (reference 32774/0x8006) (Terminator) > < Message type: RELEASE (77) > > Protocol Discriminator: Q.931 (8) len=5 > > Call Ref: len= 2 (reference 6/0x6) (Originator) > > Message type: RELEASE COMPLETE (90) > > > I really don't know what is going on, and i will apreciate any idee. > > Thank you very much. > > Diana Cionoiu > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users