On Monday 02 June 2003 03:46 pm, Mike M wrote: > With some trepidation I've come to inquire about platform > requirements for * after having spent a couple of hours searching > and browsing the archives and skimming the Handbook (very nice). > I've found recommendations for 800-1000 Mhz and 128-256 MB RAM > machines. My curiosity is not about what machine I need to start > using * to support live comm ops. Rather, I want to know if a > couple of dinosaurs that I have in the corner can be used to do > some learning. > > I have a Pentium 133Mhz 16MB RAM box with PCI bus, and a Pentium > 75Mhz 32MB RAM box with PCI bus. Will these boxes work for > back-to-back experimentation with PRI in this configuration?: > > POTS phone-----[ * ]---PRI---[ * ]---POTS phone > > I assume that I'll need to get a couple line cards and a couple T1 > cards.
First, they're going to have to be MMX. The 133 might be, but the 75 is definitely not. Normally you don't want to go much below a 200MHz processor for a base-level system; you could certainly try something slower, but not without MMX instructions. -Tilghman _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users