On Sat, 2003-06-07 at 19:14, [EMAIL PROTECTED] wrote: > We are in the prossess of ordering a ISDN (PRI) line from Verizon. There > are a couple of questions on the application that I don't understand. I'm > still a newbie here but we're taking the big plunge. If someone could > give me some direction here I would be greatly appreciative. The > questions on their app that I don't understand are: > 1.) The Verizon Co will outpulse 10 digits to the PBX, is this > satisfactory?
See my other comment, but 10 digits is what you want. "outpulse" is a interesting way of putting it. Of course I went through some interesting times dealing with our telco in getting them to use terminology that was appropriate to the circuit we where ordering. > 2.)DNLS Digit Dialing - Prefix and Delete - (if yes, what will it be?) not sure on this one. > It's also asking for the PBX manufacturer / system model number and the > PBX software / release. Should I just fill in Asterisk and the realease > for these questions? May want to include your T1 card model number(T100P,T400P) too so if they want to check up on the FCC cert they can easily. > Lastly, they wish to know if it is custom or national ISDN and if its > national - if it is 1,2,3. How do I determine this? > Thanks for any and all help. If you look in /etc/asterisk/zapata.conf you will see the options. Looks like you need national, but I don't know what version. -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
