> On Sun, 15 Jun 2003, John Laur wrote: > > > I do not think it is necessarily a hardware issue, as the line-in-use > > lights do not light until the wcfxo kernel module is loaded. It would be > > very nice for asterisk to be able to share these lines via the PBX.. > > That is very interesting. I have assumed that it is hardware related. Our > X100P is currently plugged into a POTS port of an ISDN TA and that seems > to have overcome the line test problem. However, we really would liek it > to be on a PSTN line.
I'm in Paris right now and can't test this change, but I've been researching the DAA and there are a few international settings I can change, so I've changed the driver in CVS so that you can specify the operational mode. Try "modprobe wcfxo opermode=1" if you're in most of Europe and that should switch to CTR21 mode which slightly modifies a few of the electrical characteristics of the DAA. As we add modes you'll be able to see them with "modprobe wcfxo opermode=-1" and then doing a dmesg. Anyway all you folks that had some trouble like this try it out and let me know if it makes any difference. Mark _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users