Here is what I have found. I could not get the modules loaded. I took the TDM400P out of my machine moved it to another PCI slot and restarted. The modules loaded with no problems and asterisk runs just fine.
Ryan > On Tue, 2003-06-24 at 22:19, [EMAIL PROTECTED] wrote: >> I just received my dev kit and installed the hardware. I followed the >> directions Digium sends out to the letter and when I ran modprobe tor2 >> I got the following error: >> >> /lib/modules/2.4.18-19.7.x/misc/tor2.o: init_module: No such device >> Hint: insmod errors can be caused by incorrect module parameters, >> including invalid IO or IRQ parameters. >> You may find more information in syslog or the output from dmesg >> /lib/modules/2.4.18-19.7.x/misc/tor2.o: insmod >> /lib/modules/2.4.18-19.7.x/misc/tor2.o failed >> /lib/modules/2.4.18-19.7.x/misc/tor2.o: insmod tor2 failed >> >> What have I missed? > > This would be because your card was not detected. > > Since I haven't kept up with what was in the dev kit, do you have the 4 > port T1 card? Tor2 is for the 4 port T1/E1 cards. If it is a single port > T1 card, you need to use the wct1xxp module. > -- > Steven Critchfield <[EMAIL PROTECTED]> > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
