I wrote the one on My Site Djernes.org. If you wish to modify it for setting up the Device for MGCP then go ahead. I will either post it here or you can post it and send me a link. I am going to finish the SIP one when I can dig up some time to write.
Shawn -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Florian Overkamp Sent: Friday, June 27, 2003 14:02 To: [EMAIL PROTECTED] Subject: Re: [Asterisk-Users] RE: [Asterisk-Users] cisco 186 helpp!ª!!!! Citeren "Shawn L. Djernes" <[EMAIL PROTECTED]>: > Hello, > > If you have the SIP firmware load in the unit then UseSIIP should be the > first yellow box in the left column. If you do not have that you may have a > MGCP version and need to get a hold of the SIP firmware and Flash the unit > first. Oh BTW, the MGCP load works fine with Asterisk too, but the driver approach is different so the howto from Djernes would not match. It can be done however. -- Met vriendelijke groet, Florian Overkamp ObSimRef BV _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users