so, do you think that this upgrade is worth doing, or should I hold out a bit longer (since I am not having any troubles right now) until the next release........? I am assuming that there will probably still be a few more upgrade releases...........
C h r i s E a r l e System Solutions Specialist ----- Original Message ----- From: "John Todd" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Thursday, July 17, 2003 9:06 PM Subject: [Asterisk-Users] ATA-186 software upgrade 2.16.1 - notes? > > I see that there's now a 2.16.1 upgrade path for Cisco ATA-186 > devices, dated (variously) July 11 or July 14 2003. > > Here are some interesting bugs that claim to be fixed. Most notable > is CSCeb17953, at least from my perspective, as I've hit this bug > before. > > CSCea42480 The Cisco ATA ignores the Require:100rel header and processes call. > CSCea69889 The Cisco ATA builds a 302 Moved Temporarily message > incorrectly after receiving a NOTIFY message. > CSCea93969 The Cisco ATA loses G.723 audio when call waiting occurs. > CSCeb01064 The Cisco ATA From header domain value changes SRV record name. > CSCeb17953 The Cisco ATA stops the registration process if it > receives an unexpected response to a REGISTER request. > CSCeb19228 The callback-on-busy feature does not work for calls to a PSTN. > CSCeb23060 Upon receiving a 4xx response to a REGISTER request from a > backup proxy, the Cisco ATA needs to continue retrying the request > with the primary proxy . > CSCeb24556 The Cisco ATA may fail to send a ring tone when acting as > a transfer target in a blind transfer. > CSCeb28218 The Cisco ATA, while in a call, detects audio from an incoming call. > CSCeb32210 When the SDP attribute a=fmtp appears before the attribute > a=rtpmap , the Cisco ATA will not send out-of-band DTMF digits. > CSCeb35955 Attended call transfers occur even when this feature is > disabled via the PaidFeature configuration parameter. > CSCeb36752 Call forwarding does not work when the Cisco ATA detects a > busy signal. > CSCeb37037 The Cisco ATA stops registering after a 2.16 upgrade is performed. > CSCeb37043 The call-waiting default user setting cannot be controlled > by the CallFeatures configuration parameter when the Cisco ATA > obtains its configuration file from the TFTP server. > CSCeb40099 The Cisco ATA plays an incorrect tone after unconditional > call forwarding is enabled or disabled. > CSCeb44406 Change the behavior of the Cisco ATA to not remove all > registrations. > > Full information can be found here: > > http://www.cisco.com/en/US/products/hw/gatecont/ps514/prod_release_note09186a00801a2519.html > > > JT > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users