Please don't use reply all function on the list. I receive list mail and will see yours without getting a special copy in my INBOX.
On Fri, 2003-07-18 at 11:19, Joe Antkowiak wrote: > Other auto dialers that I tested connected to the same channel on the same channel > bank work fine, only because they wait longer before dialing after verifying they > have a dialtone. > > But, in any case, this is a CAC adit 600 with an FXS-8 card. > > -----Original Message----- > From: Steven Critchfield <[EMAIL PROTECTED]> > Date: 18 Jul 2003 02:55:44 -0500 > To: [EMAIL PROTECTED] <[EMAIL PROTECTED]> > Subject: RE: [Asterisk-Users] serious dtmf recognition problem. > > I haven't had any problem with DTMF detection, so lets also look at what > channel bank are you using. > > A crude hack is to find out where the cc machine is dialing and just > assume any call from that line of the channel bank is only going to dial > the cc machine number. > > On Fri, 2003-07-18 at 02:46, Joe Antkowiak wrote: > > Unfortunately, I have no way of changing the dialed number on the credit > > card machine =/ > > > > Is there any way I can get asterisk to recognize those first few digits? > > Something I could modify in the source? > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Steve Underwood > > Sent: Friday, July 18, 2003 12:32 AM > > To: [EMAIL PROTECTED] > > Subject: Re: [Asterisk-Users] serious dtmf recognition problem. > > > > Hi Joe, > > > > Most auto-dialers will accept commas in the dial string, and insert > > delays where they occur. Will that work for you? Its normally used to > > insert a delay after a 9 on a PBX, to get a stable outside line before > > further dialing. > > > > Regards, > > Steve > > > > > > Joe Antkowiak wrote: > > > > > Hi, > > > > > > I am using a channel bank and zaptel hardware. I have a credit card > > > machine on one of the channels that appears to be dialing "too soon" > > > for asterisk, every complete number recognized by asterisk is missing > > > the first 1-4 numbers. This is a serious problem for me, anyone have > > > any ideas on whats going on? The pstn picks up on the dtmf tones just > > > fine. > > > > > > I was able to get it to work 50% of the time by adding: > > > > > > exten => _8XXNXXXXXX,1,Dial(Zap/g2/1${EXTEN}) > > > > > > but that's really ugly. > > > > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users -- Steven Critchfield <[EMAIL PROTECTED]> _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
