OK, this is probably a dumb question for a lot of you, but I have no experience with digital lines outside of a tiny bit of ISDN, so I'll just bite the bullet and ask some newbie questions. I am attempting to plan an asterisk installation with about 20 SIP phones and the following incoming lines:
1) At least 6 (as many as 10) lines for voice to the SIP phones 2) 2 incoming/outgoing fax 3) 4-10 lines for an IVR application I feel like a T1 with 24 channels should suffice, but what exactly do I order and what to I have to have in my asterisk unit to interface? Does the line they terminate just plug into a T100P or do I need some extra hardware? What services do I need to be sure I order on the T1? Is there a way using the T100P to dynamically allocate unused voice channels for data? Finally, how do I get the best fax performance for two analog fax machines out of this setup? Will an ATA-186 serve, or will I get much better performance using a TDM400P with zaptel bridging? Thanks, John _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users