Hi, Cisco 7940/60 does P2P with FWD.
BR, Dan ----- Original Message ----- From: "Dave Packham" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, July 29, 2003 5:30 AM Subject: Re: [Asterisk-Users] RTP session traversing Asterisk server... > Check out this bug > > http://bugs.digium.com/bug_view_page.php?bug_id=0000005 > > its a know problem. I have played with the canreinvite stuff to no end and have never gotten my Cisco Phones to do P2P RTP. I am going to try free world dialup to see if it does P2P with my Cisco Phones then it might just be a message thing on * server. > > Dave Packham > > > >>> [EMAIL PROTECTED] 7/28/2003 4:16:16 PM >>> > On your sip.conf for each sip endopoint set canreinvite = yes. > > That way the rtp stream won t go through *. The only problem though is for > ATA 186. They need canreinvite = No when they are in a NAT environment. > > > > ----- Original Message ----- > From: "Low, Adam" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, July 28, 2003 11:29 AM > Subject: [Asterisk-Users] RTP session traversing Asterisk server ... > > > > > > I've been reading up on the SIP and related (SDP/RTP) RFC's and as I would > expect the RTP session should ideally be between the two end points of the > call, in my case the AS5300 and the 7940 which are connected on the same > VLAN as the Asterisk server. > > > > When I sniff the packets on the VLAN I find that all RTP packets are being > relayed by the Asterisk server causing increased load on the server and > ultimately a higher latency between the two end points. > > > > Is this a typical operation of Asterisk or is this possibly due to the > fact that some of the phones (not those used in the tests) are running NAT > and Asterisk relays all RTP packets ? > > > > Adam > > > > > > ********* DISCLAIMER ********* > > > > This message and any attachment are confidential and may be privileged or > otherwise protected from disclosure and may include proprietary information. > If you are not the intended recipient, please telephone or email the sender > and delete this message and any attachment from your system. If you are not > the intended recipient you must not copy this message or attachment or > disclose the contents to any other person > > > > > > _______________________________________________ > > Asterisk-Users mailing list > > [EMAIL PROTECTED] > > http://lists.digium.com/mailman/listinfo/asterisk-users > > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ > Asterisk-Users mailing list > [EMAIL PROTECTED] > http://lists.digium.com/mailman/listinfo/asterisk-users > > _______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users