Hi kapejod,
I tried the following firmware:
Driver 3.10-02 (from card's CDROM), Protocol DSS1 Line type Point-to-Multipoint.
CAPI Channel driver is 0.2.4a.
My capi.conf looks like this:
[general] nationalprefix= internationalprefix= rxgain=1 txgain=1
[interfaces]
msn=7810 incomingmsn=7810 controller=1 softdtmf=0 context=remote devices=2
I did the same test on a 2GHz P4 (kernel 2.4.21) system. I still can't get the second B channel to work properly (i get the same errors).
With "capi info" console command, I can see that the two B channels are open (0 B channels free), but they don't work.
If you need more info, just let me know. Thanks in advance, Michael.
Klaus-Peter Junghanns wrote:
Hi,
did you try the original AVM drivers from ftp.avm.de/cardware? what else is running on the box? loadavg?
230 irqs/sec sounds a lot, even for 2 B channels, but i dont have any experience with the AVM pcmcia cards.
regards
kapejod
Am Mon, 2003-07-28 um 17.08 schrieb Michael Manousos:
Klaus-Peter Junghanns wrote:
Hi creator of the first H323 channel ;-)
Hi creator of the only CAPI channel driver :))
does the B1 get its own irq? did you try different versions of AVM's capi drivers?
Yes, the B1 gets its own IRQ and, yes, I did try different AVM firmwares (ftp://ftp.in-berlin.de/pub/capi4linux/firmware). An important notice. The device gets aprox. 230 interrupts/sec on a StrongARM 1110 based platform (200MHz). Is this normal?
regards
kapejod
Thanks, Michael.
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________ Asterisk-Users mailing list [EMAIL PROTECTED] http://lists.digium.com/mailman/listinfo/asterisk-users
